Quote:
Originally Posted by Daryles
Yes, I agree on the 3 series/ 2 parallel configuration when I add more panels.
I wish I had a table showing the Victron 100/30 MPPT conversion of input voltage/current to output voltage/current.
It would greatly help in deciding which way to go with the wiring rather than trial and error.
Here's a good article on mixing panels, more so for the math involved really.
https://solarpanelsvenue.com/mixing-solar-panels/
|
Keep in mind, the 100/30 is limited to 440W of solar w/ 12V battery config. The 100 is the open circuit voltage of the PV side and the 30 is the rated charge current on the battery side.
https://www.victronenergy.com/upload...-100-50-EN.pdf