Montana Owners Club - Keystone Montana 5th Wheel Forum - View Single Post

H. John Kohl · 06-25-2020, 09:59 AM

Here is the link for the manual of the PD9200 system

Your system has the- Equalize Mode (14.4V for 12V models and 28.8V for 24V models) - The Charge Wizardwill automatically switch to equalize mode for approximately 15 minutes every 21 hours the converter remains in storage mode. This will help prevent battery stratification, sulfation and loss of battery capacity (useful life).

BOOST MODE - Indicated by green LED remaining on.

NORMAL MODE - When the battery is between 50% and 90% charged, the green LED will flash once per second. When the battery has reached 90% of full charge the green LED will flash 2 - 3 times per second.

STORAGE MODE - Indicated by green LED flashing every 6 - 8 seconds.

MANUAL BUTTON - The manual button has been provided to allow the operator to temporarily override the converter (not recommended) or to verify the converter is operating properly. For manual operation, press and hold the button. The indicator light will soon remain “ON” indicating Boost Mode. Continue to hold the button and the light will blink rapidly indicating the converter is in the Normal Mode. Continue to hold the button until the light blinks slowly indicating the converter is now in the Storage Mode. After the manual button is released the converter will stay in the selected mode. When the battery charge status changes, the converter will return to the automatic mode of operation to prevent damage to the battery.

If this does not satisfy your boost requirement then I suggest you contact PD. I know it does not cover second charger. I "assume" PD has protecting circuitry to save your battery.

06-25-2020, 09:59 AM	#3
H. John Kohl Montana Master Join Date: May 2003 Location: New Bern Posts: 4,294 M.O.C. #311	Here is the link for the manual of the PD9200 system Your system has the- Equalize Mode (14.4V for 12V models and 28.8V for 24V models) - The Charge Wizardwill automatically switch to equalize mode for approximately 15 minutes every 21 hours the converter remains in storage mode. This will help prevent battery stratification, sulfation and loss of battery capacity (useful life). BOOST MODE - Indicated by green LED remaining on. NORMAL MODE - When the battery is between 50% and 90% charged, the green LED will flash once per second. When the battery has reached 90% of full charge the green LED will flash 2 - 3 times per second. STORAGE MODE - Indicated by green LED flashing every 6 - 8 seconds. MANUAL BUTTON - The manual button has been provided to allow the operator to temporarily override the converter (not recommended) or to verify the converter is operating properly. For manual operation, press and hold the button. The indicator light will soon remain “ON” indicating Boost Mode. Continue to hold the button and the light will blink rapidly indicating the converter is in the Normal Mode. Continue to hold the button until the light blinks slowly indicating the converter is now in the Storage Mode. After the manual button is released the converter will stay in the selected mode. When the battery charge status changes, the converter will return to the automatic mode of operation to prevent damage to the battery. If this does not satisfy your boost requirement then I suggest you contact PD. I know it does not cover second charger. I "assume" PD has protecting circuitry to save your battery.