[LeftOverParts]

Although it's probably is not related to the model, we had two shades at the dining table on our 2021 3231 break (wouldn't stay down) at about the 1 year mark. It ended up being the spring mechanism and the plastic cog. Called Irvine Shade and they said we must go through a distributor. So, went with RV Blind Co, 602-321-9986. They mailed the parts right away and took under 30 mins to replace. Since they were about $50 for the pair, didn't deal with the hassle of going to the RV dealer and just DIY'd it.

If it's an ISD roller, it will be stamped as such on one of the roller ends. If you go the DIY route they will need the shade width and diameter of the roller pole. To remove the valance, you'll need a #2 square bit. If the shade is one of the longer ones, you'll probably need someone to hold one end of the roller while the other unclips it from the brackets. RVBC has a YouTube video on how to install and adjust the spring.

Went with the residential fridge. GE model, no ice maker. (So far, so good but we did buy a 3 yr ext warranty for the trailer.)

Ordered with discs and came with Kodiak 250's. They work great. (Ford uses a gain control on the brake controller.) Just finished the bearing re-grease and the pads will be super easy to change when the time comes. Kodiak uses semi-met pads that cross reference to GM cars so will be very economical and easy to source.