Quote:
Originally Posted by dieselguy
All slides, or just one? It's usually the bedroom slide as it's usually the lightest and has the least moving resistance. Assuming you have noticed no leaks and the reservoir is within 1" from the top when all slides are in and all landing gear are up ... you might have air in the system, or you have a slide cylinder piston seal leaking internally. Since it's winter (cold) and it's been in storage a while, you may get lucky and simply cycle the slides completely in and out 3-4 times. The system is self bleeding this way and it also allows the piston seals to exercise a bit to limber up so to speak. Or, you may have a seeping valve/solenoid that actuates the slides independent from the landing gear.
|
Thank you. I have cycled my slides several times but get the same result.