|
I have 3 Renogy batteries on order - 100 Ah. Looking at the specs, 100 amp warning for discharge, 120 amp max trip. I'm hoping they will be adequate. We will know in a couple of weeks.
My rig has a 200 watt panel. With my current Victron 100/30 MPPT I should be able to connect another in series.
I guess I should have shared my thoughts from the beginning - utilize the batteries for their capacity, take advantage of the sunlight and top off with the genny as needed. The batteries were my biggest concern as I have the residential fridge, and wanted the capacity to run the furnace through the night and have enough reserve to start the genny after quiet hours were over to recharge. My convertor is lithium compatible and rated at 75 amps so I should have a decent charging rate available.
Not perfect by any means, but it will get us started and we will adjust, add-on, etc. as we go.
Again, I can't say this enough, thanks for the advice and suggestions!
|