Quote:
Originally Posted by Daryles
Trace it. From the battery to the first breaker LEFT post. The wiring on the right post is on the other side. Now follow the short jumper to the second breaker RIGHT post. The hydraulic system wire is attached to the same post. Everything on the LEFT post of this breaker (goes to the converter) is on the other side of the breaker.
So electrically speaking, all the breakers are in parallel.
|
OK, I see it. The circuit to the pump is on the line side (right side of the breaker) and the load is on the left. You cut the new breaker into the line side. I need to do this and want to make sure I get it right. My levelers stop and start in cold weather. I also had the front legs completely bleed off last night I assume due to it getting down to 15 degrees. Have you had that issue?