|
First off go to the boat store or on line and get plastic scrapers just like razor blades but they are plastic. They work great. you can change them just like razor blades when they get dull. You need to do it when the sun is on the graphic about 70 degrees. We used a hair dryer and heated up the graphic and peeled the graphic off in shreds with your fingers. This just takes off the graphic. The glue remains. We then used goof off and sprayed it on let it sit for about 30 min. and then used the plastic scrapers. We only took off the front cap and it took about 3 hrs total 1 person. After it was finished we cleaned it with alcohol. Then soap and water. We paid to have it put back on. So far so good. Keeping our fingers crossed. I am sure others will be on here with perhaps different tricks but this worked well for us. Good luck! It is not an easy job but looks much better when done. Hopefully for a while afterwards.
|