[RipNC]

The following response from Lippert is contrary to the discussion I had with a customer service rep named Vance who was very knowledgeable on this issue and has actually done work on this slide issue. I will be calling in and NOT FOLLOWING THIS ADVICE:

"The portion of the outer tube with the wear tabs will need to be pounded down some so it is flat. Then the bracket will need to be placed on the outer tube with the plate pressing down on the wear tabs and metal. In some cases the portion of sub floor would need to be removed so the bracket can sit correctly. I would double check with your coach maker to see if the subfloor is two piece wood with foam core. If you have any questions please feel free to call our techs at 574-537-8900"