Quote:
Originally Posted by Carl n Susan
If I am understanding correctly, you are trying to manually run the jacks yourself. This is easy. Press the Up arrow on the left side (below the LCI logo) until the LED display show "Manual Mode", then press "Enter". It is important to press "Enter"!!!!!!!! You can then use the buttons on the right side (Front, Rear, Left, & Right) to adjust the jacks down. To raise the jacks you first need to press the "Retract" button on the left. Then the the right buttons will raise the jacks.
To display the current battery voltage, press the the up arrow on the left side (4 times?) until the LED display shows the current voltage.
|
By raising the jacks, you will be LOWERING the coach. Extending your jacks will obviously raise up your coach. If you have difficulty using the controller to level, If you have a bubble level, place it on your floor in the center of your coach and level front and back, then turn level to run side to side and level accordingly. Like Carl said, you need to make sure you press the “enter” button after you select the “Manual mode” if that doesn’t work for some reason, call Lippert and they will walk you through it.