[Bladescb]

Just a follow-up. I pulled the fuses until the camera turned off. Fuse #3 which is the rear bedroom fuse. I removed anything the was always "hot" (lights, thermostat, etc) in the bedroom and found were no extra wires coming from the camera. Then I looked under the RV and found nothing extra that may go to the camera. So, I pulled the camera and mounting bracket off. There was factory wiring right there that was always "hot"! I cut the camera wires off and rerouted it to the upper clearance light directly above the camera (12"). Now, tow vehicle lights on, camera on!