Hi
There were 2 things I found before I got tired of fooling with that receiver and removed it.
The ground is located near the receiver and is a self taping screw that was installed without cleaning any paint off the metal. This sometimes causes you to lose ground.
The second thing I found was part of the system would quit working like you describe I would pull the fuse on the power in to the receiver wait about 1 minute and put the fuse back in and everything would work properly for a while.
Phil P
__________________
2009 Montana 3665RE
2009 Duramax 3500 DRW quad cab
personal web page https:// www.sallyscoffees.com
If you get a page not available then remove the "s" after HTTP
|