|
On our 3121 there are 2 short screws that go up into the top of the valance. After removing those and the valance I was able to find the clips were not used for the blind and it was screwed to the wall with 2 more screws thru the back flange of the blind head/body. A little tough to get the driver in over the front flange but doable. Just FYI - you'll find grease on the back of the blind head (between head and wall).
__________________
Rip & Beth
2021 3121RL Legacy Cobalt FBP, MORryde IS & pin box
2020 F350 PSD CCLB SRW
|