[wward208]

quote:Originally posted by Overlord

1. Set fill lever from Normal to Power Fill, this directs the flow to the fresh water tank.

2. Hook a hose from the container/bladder that has your water in it to the Winterize connection in the convenience center. Make sure to have an air-tight seal at this connection, or the pump will not draw the water from the container (some use two rubber washers). It also helps to elevate the container so you have less head (water column height to the pump) to maximize flow rate.

3. Turn on the on-board pump.

4. Wait patiently.



Alternative:

If you have a 12volt auxiliary pump that you can use directly between your water container/bladder and the trailer, hook the hose to the City Water connection, and turn the fill lever to Power Fill. Basically, the same way you would fill from a faucet. ....and if your aux pump has a better pressure and flow rate than your on-board pump, it will be quicker.