Montana Owners Club - Keystone Montana 5th Wheel Forum - View Single Post

**DQDick** · 08-04-2018, 11:07 AM

As you look up at it you will see three tabs. Use a small screwdriver and gently work each off and the cover will come off. The tabs are holding on to a sleeve so they can rotate. The sleeve it is attached to will then be exposed. While you are in there you might want to do what many of us have done and cut the sleeve off so it doesn't obstruct the ductwork. The sleeve is held on with screws. Some of us have also cut everyother fin off the cover for more air flow.

08-04-2018, 11:07 AM	#2
DQDick Site Team Join Date: Jun 2011 Location: Wilsey Posts: 18,799 M.O.C. #11455	As you look up at it you will see three tabs. Use a small screwdriver and gently work each off and the cover will come off. The tabs are holding on to a sleeve so they can rotate. The sleeve it is attached to will then be exposed. While you are in there you might want to do what many of us have done and cut the sleeve off so it doesn't obstruct the ductwork. The sleeve is held on with screws. Some of us have also cut everyother fin off the cover for more air flow. __________________ Dick, Joyce, Diego, Picatso and Gustav 2017 3720 RL, and 2013 HC 343RL Pullrite Hitch, IS, Disk Brakes, 3rd AC, Winegard Traveler, Bathroom door mod, Dometic 320, couch for desk swap, replaced chairs, sun screens, added awnings, etc.