|
Lippert hydraulic slides pause - BCM ERROR
We have owned our 2016 Montana 3611 RL Legacy for just over a year.
The hydraulic level system works great.
The large hydraulic slides work, but they pause several times going in an out.
We have the InCommand version 1.
While engaging the screen to operate the slides, it has to reconnect to BCM several times which causes the slides to pause.
We have tried operating the slides one at a time, using the knobs on the exterior control panel. No help.
I have upgraded the breaker for the hydraulics to 80amp. No help.
I have a Victron Battery Monitor and have been watching the amps in real time while my wife operates the InCommand screen. When the BCM connection error occurs, the DC amps have jumped above 80 amps.
We have been considering replacing the InCommand to the latest version, with a wire from the DC to the BCM if that is what will cure the problem.
If the limit for the hydraulics is 80 amps, then the InCommand upgrade may not help.
Anyone cure this issue?
__________________
Fulltimer Domicile: Florida SKP Resort, Wauchula, Florida
2016 Montana 3611 RL Legacy - 2000w Solar, Victron whole house power, 1200ah Chins LiFePO4, RV Armor roof, Verizon 5G Home Internet
|