|
Lots of good information on the WEB. I have just put in a 60amp sub panel using #6 wire with a 90’ run. 110/120 volt requires big wires especially over long distances. I think code say that anything over 100’ you have to upsize the cable. Might have to double that at over 200 feet. Last thing you need is lots of voltage drop. If you do go underground with conduit make sure your wire is rated THWN although my wire came rated THWN and THHN. If you look up the amperage in NEC you can usually find what size conduit, wire size for that distance and also ground cable size etc.
Good luck, be safe and get a permit or even hire an electrician.����
Tom Marty
__________________
|