[BuckandTeresa]

I ended up widening the previous Dishnet coax hole in the entertainment slideout with a 3/4” bit, then fed dark brown Gorilla tape through to shield the cable from the metal edges. I made a tunnel with the tape to make it easier for the narrower end of the Starlink cable to feed from the inside out. I velcroed the router to the back wall behind the TV for security during travel. I will add a temporary patch of Gorilla tape over the exterior exit hole and cable during setup. I mounted a Dishnet ladder mount to the ladder (after removing the round plate) and adding a short length of pipe with the Starlink proprietary pipe adaptor.

Pretty simple. I will add Velcro straps to the ladder mount to relieve the strain on the cable as it hangs down from the Starlink antenna.

Thanks again to everyone for their help.