[ScottN]

I decided to mount the Pro Trailer Backup Assist (PTBA) module on the inside of the hitch structure (using the included adhesive pad). I used the small wire ties to attach the PTBA cable to the 5th-wheel’s 7-pin cable.

Configuring the PTBA in an open parking lot took only a few minutes. After configuring, I used the parking lot lines to test straight-line backing. It was very precise; I could go 50-60 feet with no deviation. When attempting to back the 5th-wheel into a simulated campsite, I realized I still need a lot of practice :-).

Thanks again for the feedback several of you provided!