|
I've supported the black and gray tanks with two extra 2x2 angle iron across the tanks with 2 self tapping bolts on each end of the angle iron and a 3 foot piece of 2x4 running length wise of the tanks in the center. All this was done on the outside of the coroplastic. The 2x4's were wedged in place and should keep the tanks from flexing. I guess i will go to the back and check out the fresh water tank and see what i need to do to that end. I don't carry a full tank very often but when i do it is for a very short distance as i try to camp not to far from the dry camping site the night before.
|