Montana Owners Club - Keystone Montana 5th Wheel Forum - View Single Post

jcurtis934 · 11-17-2021, 03:46 PM

Andre, you can use the same panels. Mine were held in place by double sided tape and the plastic rivets. My neo angle tub/shower base was ordered through LaMesa RV. My glass enclosure had to be removed first and it is a single piece unit. Plastic wall unit is easy to replace, just take your time in separating it from the wall/s. If your tub has a seat in it...make sure to make sure it is level or slightly sloped for water run off before putting everything back in place.

11-17-2021, 03:46 PM	#14
jcurtis934 Montana Master Join Date: Sep 2013 Location: Pensacola (mail forward service) Posts: 3,198 M.O.C. #13740	Andre, you can use the same panels. Mine were held in place by double sided tape and the plastic rivets. My neo angle tub/shower base was ordered through LaMesa RV. My glass enclosure had to be removed first and it is a single piece unit. Plastic wall unit is easy to replace, just take your time in separating it from the wall/s. If your tub has a seat in it...make sure to make sure it is level or slightly sloped for water run off before putting everything back in place. __________________ 2012 F350 6.7 L dually, 2013 3800RE with 6 pt leveling, Sumitomo 17.5" load range h tires, Samsung 18 cu ft residential fridge, 8k Morryde I.S. with disc brakes. Full timing since 2012.