Montana Owners Club - Keystone Montana 5th Wheel Forum - View Single Post

jcurtis934 · 01-10-2022, 07:58 PM

It can't move forward if you install a triangle shaped block of wood in front of each front roller...held in place by a long screw angled into the plywood base the fridge sits on. Just looking at the way keystone designed the fridge enclosure when you bought the unit should have told you that it was lacking. The walls of the Montana are aluminum studs of very thin metal. And they should have bonded a plate on the rear wall, not used screws driven straight into a stud, IF they even hit a stud.

01-10-2022, 07:58 PM	#4
jcurtis934 Montana Master Join Date: Sep 2013 Location: Pensacola (mail forward service) Posts: 3,198 M.O.C. #13740	It can't move forward if you install a triangle shaped block of wood in front of each front roller...held in place by a long screw angled into the plywood base the fridge sits on. Just looking at the way keystone designed the fridge enclosure when you bought the unit should have told you that it was lacking. The walls of the Montana are aluminum studs of very thin metal. And they should have bonded a plate on the rear wall, not used screws driven straight into a stud, IF they even hit a stud. __________________ 2012 F350 6.7 L dually, 2013 3800RE with 6 pt leveling, Sumitomo 17.5" load range h tires, Samsung 18 cu ft residential fridge, 8k Morryde I.S. with disc brakes. Full timing since 2012.