MikeandDebbie, I like the idea of bonding plywood to the wall. I can also use a piece of 1x2 screwed into the floor in front of the casters to prevent it from rolling. I’ll take pics as I do the repair to help others.
Quote:
Originally Posted by Castner's
on your bathroom door roller, go to a three roller system with the rod that does not move. It will hold your door with no problem!
|
I drilled out the roller and cut a 1/4” microwave screw to 2 1/2” and installed so the screw rotated in the roller. I also had to install extra screws to hold the pivot hing as Keystone thinks only 2 was enough. It works great now.
