You need to verify you have AC power to the rig, make sure you have two hot legs at the pedestal and that the breaker is working.
Next, verify the two pole main breaker in the inside panel has power and is on.
Make sure your battery(ies) are good, as it's possible the the battery is bad and you were operating on converter power alone.
If you are not getting power from the battery, check that you have power on both sides of the auto-reset breaker that sends power into the panel from the battery.
These steps should get you working again.
__________________
Bob & Becky
2012 3402RL
2012 Chevy 2500HD D/A CC 4WD
|