[lesmadding]

Well I’m not sure since yours is a 2019 but I would assume it’s of similar construction. There is an obvious metal strip with screws in the front of the bay that must be removed. The convenience center must be removed and the access panels on the rear of the bay. Once these things are done you should be able to see screws holding the floor in place. But the flooring material is sandwiched between the aluminum framing of the trailer and an exact fit from side to side. I don’t believe you’ll be able to remove it in one piece. Mostly will have to come out in pieces. I was able to put mine back together in halves. The was not an easy repair. Good luck!