|
01-07-2021, 10:22 AM
|
#1
|
Seasoned Camper
Join Date: Nov 2020
Location: Humboldt
Posts: 73
M.O.C. #27605
|
Bike Rack in Rear of 5ver
I recently purchased a 2013 3582RL. It is currently in storage for the winter and I won’t have access to it until spring. I would like to install a bike rack at the rear of the trailer when we travel. However, this particular model does not have a receiver. I would like to extend the frame and add a receiver to the extension. Can anyone tell me what would be involved in doing this? Is the frame exposed underneath to make the job easier? Any other considerations? The bike rack is about 35lbs. plus 2 bikes so it wouldn’t have to support a huge load. Any advice would be appreciated.
|
|
|
01-07-2021, 02:38 PM
|
#2
|
Site Team
Join Date: Sep 2017
Location: Oro Valley
Posts: 3,961
M.O.C. #20477
|
I have a new bumper with a receiver welded to the frame. This was done by a trailer shop. Hollywood racks makes a few bike racks build to work on a fifth wheel - most racks are lighter duty and not designed for the stress they get on a fifth wheel.
The other options to consider are a rack on the front of your truck or on the pin.
__________________
Zack and Donna plus Millie and Ranger
2018 3160RL
"Life is too short to stay indoors, enjoy the ride!"
|
|
|
01-07-2021, 06:40 PM
|
#3
|
Seasoned Camper
Join Date: Nov 2020
Location: Humboldt
Posts: 73
M.O.C. #27605
|
I don’t want them on the front of the truck and my truck has a shorter box so putting the rack on the pin won’t work. The other question I had is whether it would be better to weld to the frame or bolt?
__________________
Cal & Kim
2013 3582RL
2012 Ram 3500 Laramie
|
|
|
01-07-2021, 06:54 PM
|
#4
|
Site Team
Join Date: Sep 2017
Location: Oro Valley
Posts: 3,961
M.O.C. #20477
|
I welded, but bolting could also work.
__________________
Zack and Donna plus Millie and Ranger
2018 3160RL
"Life is too short to stay indoors, enjoy the ride!"
|
|
|
01-08-2021, 05:07 AM
|
#5
|
Montana Master
Join Date: Jul 2014
Location: Upstate NY
Posts: 1,788
M.O.C. #14547
|
That trailer back bumper may be the worst possible place to haul bikes with the exaggerated movement there which can tend to be somewhat violent and damaging to bikes.
__________________
Dave W
2014 Montana High Country 343RL (Sold!)
2011 Ford 6.7 Lariat CCLB (Went to PU Heaven)
2019 F150SC XLT SE Sport,w/full tow package
|
|
|
01-08-2021, 05:29 AM
|
#6
|
Montana Master
Join Date: Dec 2007
Location: Kansas City, Missouri
Posts: 2,710
M.O.C. #7992
|
Mine has been bolted on for about 12 years. Seems to work fine. I understand what Dave W is saying about the movement. If you ever follow one down the road it looks exaggerated. The bikes if secured to the rack adequately are not taking a beating just moving in harmony with the rack. My bike takes a lot more beating on a trail with both wheels on the ground and my 195 pound butt on the seat.
__________________
2006 3000RK
2009 Ram 2500
|
|
|
01-08-2021, 07:57 AM
|
#7
|
Montana Master
Join Date: Aug 2015
Location: SWFL
Posts: 964
M.O.C. #17801
|
If you have a square bumper that is properly attached to the rear, you can use a bolt-on receiver. Mine is solid (some aren't) and I've been carrying two bikes for years with no issues.
__________________
2016 Montana 3711FL
2005 Ford F350, 6.0 diesel, short bed
Demco Hitchiker Auto Slide hitch
|
|
|
01-08-2021, 08:01 AM
|
#8
|
Montana Master
Join Date: Jun 2018
Location: Carson City
Posts: 2,017
M.O.C. #21963
|
Bolt on is fine especially for the light load you have. If there is any excessive bouncing there is a U bolt type device that firms up the connection from the rack to the receiver. There is no significant difference between what is shaken on a bike rack or the contents inside the rear of the trailer. Afterall, the two are only a couple feet apart.
__________________
2016 3160, Legacy, Sailuns, Splendide 2100 xc vented, 1 1/2" axle lift blocks, disk brakes. 2014 Ram 3500 SRW SWB 4X4 6.7 Aisin Mega Cab, EBC slotted disks and brakes, Titan fuel tank.
|
|
|
01-08-2021, 08:51 AM
|
#9
|
Montana Master
Join Date: Feb 2006
Location: Denver
Posts: 1,046
M.O.C. #5329
|
We carried our bikes for years with a mount that attaches to the ladder. Very secure, and no alterations to the 5er.
|
|
|
01-08-2021, 11:55 AM
|
#10
|
Montana Fan
Join Date: Oct 2017
Location: Moultrie
Posts: 250
M.O.C. #20747
|
Carrying two bikes on a rack attached to my ladder broke the ladder.
__________________
Frank and Marilyn
2014 3402RL, Sailun S637/Disc Brakes
2015 F350 CC LWB SRW 6.7L PSD FX4
|
|
|
01-08-2021, 03:31 PM
|
#11
|
Montana Fan
Join Date: Mar 2015
Location: Caledonia
Posts: 345
M.O.C. #17151
|
I had Lippert weld a receiver onto the frame. I then added the bike rack. Have traveled to FL for the past three seasons with it and no issues.
__________________
John & Laura___& Bentley
2017 Montana 3950BR
2015 GMC Sierra Denali Dually
|
|
|
01-08-2021, 06:13 PM
|
#12
|
Seasoned Camper
Join Date: Nov 2020
Location: Humboldt
Posts: 73
M.O.C. #27605
|
Quote:
Originally Posted by phillyg
If you have a square bumper that is properly attached to the rear, you can use a bolt-on receiver. Mine is solid (some aren't) and I've been carrying two bikes for years with no issues.
|
Sorry, maybe I wasn't clear in my original post. My 5th wheel does not have a bumper or a receiver. I would like to fabricate something that I can either weld or bolt on to the frame underneath the trailer and weld a receiver to that so that I can mount a bike rack. I'm thinking as long as the bike rack fits snugly into the receiver, the bikes should be fine.
My question is more specific to the 2013 3582 model. After purchasing I put it in storage for the winter. I do know that it has no bumper. Before I put it in storage I did not look underneath the trailer, so was wondering if anyone knew how difficult it would be to do the above to this specific trailer.
__________________
Cal & Kim
2013 3582RL
2012 Ram 3500 Laramie
|
|
|
01-09-2021, 06:09 AM
|
#13
|
Montana Master
Join Date: Oct 2017
Location: Bastrop
Posts: 2,892
M.O.C. #20753
|
__________________
Mocha, one-eyed toothless, hurricane survivor, Pirate dog
2019 20th Anniversary Edition 3701LK
B&W 20K for Ford OEM Puck
2018 Ford F-350 Lariat CCLB PSD DRW KJ5CQH
|
|
|
01-09-2021, 09:36 PM
|
#14
|
Montana Master
Join Date: Nov 2012
Location: Rancho Santa Margarita
Posts: 633
M.O.C. #13025
|
I have a short bed truck and I put a hitch on my pin. It works great.
__________________
Russ and Linda, So. California
2004 Chevy Silverado 2500 HD, D/A, SRW, SB
2005 2955RL, Pullrite Superglide 16K hitch. Bridgestone Duravis R500 tires. EZ Flex Equilizers with wet bolts.EMS HW50C, Disk brakes
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|