|
01-10-2022, 08:10 PM
|
#1
|
Seasoned Camper
Join Date: Nov 2020
Location: Humboldt
Posts: 73
M.O.C. #27605
|
Auto level
My hydraulic jacks have been popping here at camp. I thought maybe they might be out of level. I went outside and hit the arrow level button. It started the levelling process but then in the middle of it, it started making a buzzing sound. I then get a message that says Please wait, auto grounding jacks. At this point I dont know what to do so I shut off the electronic leveling. Can someone help me?
|
|
|
01-10-2022, 08:20 PM
|
#2
|
Montana Master
Join Date: Sep 2013
Location: Pensacola (mail forward service)
Posts: 3,198
M.O.C. #13740
|
Jack's popping are a common problem due to weather changes. Lippert has a document that outlines the issue and what to do. You can even call them and they will talk you through it. You don't have to use auto leveling, which I think is a pain in the butt. You can manual level just by turning power on the level panel, hit the up arrow, then it enter. The panel will say that you are now in manual mode and you can raise or lower the front Jack's, or do other Jack's. But as I said first, this is a known issue. Following the advice of lippert or this panel of users to pull out some of the fluid and replace it with the fork oil per lippert AND cycle the hydraulics to mix the fluid in the lines will greatly reduce the popping situation. Good luck.
__________________
2012 F350 6.7 L dually, 2013 3800RE with 6 pt leveling, Sumitomo 17.5" load range h tires, Samsung 18 cu ft residential fridge, 8k Morryde I.S. with disc brakes. Full timing since 2012.
|
|
|
01-10-2022, 08:27 PM
|
#3
|
Seasoned Camper
Join Date: Nov 2020
Location: Humboldt
Posts: 73
M.O.C. #27605
|
Thank you for the reply about the popping sound. I am somewhat familiar with this issue. Right now I'm more concerned with not being able to auto level. Is there some way to reset the system?
__________________
Cal & Kim
2013 3582RL
2012 Ram 3500 Laramie
|
|
|
01-10-2022, 08:41 PM
|
#4
|
Seasoned Camper
Join Date: Nov 2020
Location: Humboldt
Posts: 73
M.O.C. #27605
|
Could a weak battery cause the creaking and grinding noise?
__________________
Cal & Kim
2013 3582RL
2012 Ram 3500 Laramie
|
|
|
01-11-2022, 05:58 AM
|
#5
|
Montana Master
Join Date: Dec 2017
Location: Mountain Home
Posts: 848
M.O.C. #20949
|
Quote:
Originally Posted by Madmax07
Could a weak battery cause the creaking and grinding noise?
|
The issue with the "Buzzing sound" you are hearing is either Low voltage to the system and/or an old OEM 50 amp resettable breaker being still installed on the cable that powers the dual polarity solenoid.. noise is the dual polarity solenoid....
My corrective actions would be:
1. Status of the battery
2. Verify Converter output on shore power 13.4 to 13.8 volts DC
3. Remove the battery cable connections and clean and reinstall
4. Also remove the battery cable to frame ground end and clean the frame to bare shiny metal and reinstall
5. Replace the 50 amp resettable breaker to dual polarity solenoid with an 80 amp ( if you have not already done so previously)
This should take care of your issues
|
|
|
01-11-2022, 09:41 AM
|
#6
|
Seasoned Camper
Join Date: Nov 2020
Location: Humboldt
Posts: 73
M.O.C. #27605
|
I already have an 80 amp breaker. Checked the battery and indeed, it needs to be replaced. I ordered a Weize 12V 100 amp Deep Cycle AGM SLA VGRA battery from Amazon. It gets good reviews and should suit our needs. We don't do a lot of boondocking.
__________________
Cal & Kim
2013 3582RL
2012 Ram 3500 Laramie
|
|
|
01-15-2022, 12:35 PM
|
#7
|
Seasoned Camper
Join Date: Nov 2020
Location: Humboldt
Posts: 73
M.O.C. #27605
|
A new battery solved the problem. As for the popping, I’m going to siphon off a quart of my hydraulic fluid and add the same amount of anti-stiction fluid and hopefully that will help.
__________________
Cal & Kim
2013 3582RL
2012 Ram 3500 Laramie
|
|
|
01-16-2022, 11:11 AM
|
#8
|
Montana Master
Join Date: Sep 2013
Location: Pensacola (mail forward service)
Posts: 3,198
M.O.C. #13740
|
Great to hear that your issue was battery related. I had used the cat fluid in the past, but it has been extremely hard to find due to supply chain issues and even cat said that they can't get stock. I just used the maxima fork oil to get success, and that can be gotten easily enough. John
__________________
2012 F350 6.7 L dually, 2013 3800RE with 6 pt leveling, Sumitomo 17.5" load range h tires, Samsung 18 cu ft residential fridge, 8k Morryde I.S. with disc brakes. Full timing since 2012.
|
|
|
01-16-2022, 02:45 PM
|
#9
|
Seasoned Camper
Join Date: Nov 2020
Location: Humboldt
Posts: 73
M.O.C. #27605
|
Thanks, I’ll look for some of that.
__________________
Cal & Kim
2013 3582RL
2012 Ram 3500 Laramie
|
|
|
01-16-2022, 03:00 PM
|
#10
|
Seasoned Camper
Join Date: Nov 2020
Location: Humboldt
Posts: 73
M.O.C. #27605
|
What viscosity?
__________________
Cal & Kim
2013 3582RL
2012 Ram 3500 Laramie
|
|
|
01-16-2022, 05:10 PM
|
#11
|
Montana Master
Join Date: Jan 2018
Location: Austin
Posts: 2,450
M.O.C. #21044
|
This is what LCI shows on the technical bulletin. I bought the fork oil becaues a motorcycle shop was 3 miles away...CAT dealer was 20 miles away.
__________________
MikenDebbie Aggie 77 in the sticks near Austin TX
2019 Chevy 3500 High Country DRW
2018 Montana 3921FB
Aussie Gus + Texas Heeler Jimmy
|
|
|
01-17-2022, 03:00 AM
|
#12
|
Montana Master
Join Date: Oct 2019
Location: Jacksonville
Posts: 2,155
M.O.C. #25165
|
The Maxima Fork Oil is available on Amazon for $12.68. Price has been dropping on it.
https://www.amazon.com/gp/product/B0...e?ie=UTF8&th=1
__________________
Robert & Diana McNeal
2019 Montana Legacy 3791RD 20th Anniversary Edition
2014 F350 4x4 6.7L SRW
|
|
|
01-19-2022, 02:11 PM
|
#13
|
Montana Fan
Join Date: Dec 2020
Location: Full Timer
Posts: 119
M.O.C. #27665
|
So does that mean they are not recommending Dextron/Mercon Automatic Transmission Fluid anymore? When did this service bulletin come out?
__________________
Full-Timing since 2018 in a 2013 3625RE, 2023 Ford F450DRW with High Output Diesel,
Custom kingpin-mounted hitch receiver for bike rack 2019
MorRyde I/S with 8K Axles & Goodyear G114 Tires on 17.5 aluminum wheels 2020
FlexArmor roof 2021, Starlink
|
|
|
01-19-2022, 03:22 PM
|
#14
|
Montana Master
Join Date: Jan 2018
Location: Austin
Posts: 2,450
M.O.C. #21044
|
There is a date in the lower left corner of the screen shot i took “7-16-2013”, and i think i have read previous threads here that agree with that time frame. Also i just noticed this screen shot came from Heartland RVs owners manual, but the system is the same on our Montanas.
Concerning transmission fluid vs hydraulic fluid question...i added fork oil to my reservoir in 2019 when the unit was about 1 yr old. I called lippert to inquire what OEM fluid was used in my unit and the tech told me that transmission fluid had been used for several years (actually i cant remember what year he said). I think i have seen several threads here debating the OEM fluid...the tranny fluid is reddish color and the hydraulic fluid is yellowish color. Mine was reddish.
__________________
MikenDebbie Aggie 77 in the sticks near Austin TX
2019 Chevy 3500 High Country DRW
2018 Montana 3921FB
Aussie Gus + Texas Heeler Jimmy
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|