|
05-17-2023, 03:23 PM
|
#1
|
Montana Fan
Join Date: Jan 2018
Location: Boone
Posts: 311
M.O.C. #21011
|
Marker Lights only 9.7 volts Help!
After installing backup camera with existing plug that came with, I noticed camera lost signal every time I applied brakes. After checking different voltages, I only have 9.7 volts on my rear marker lights, and when applying brakes the voltage dips below the camera standards, and drops out. So, checked ground on pin box, voltage and all connections in the cord junction box under pin box. All is good, perfect 12.1 volts. Checked all bulbs including tail light bulbs. Junction box starts at 12.1 volts, the two front marker lights is 10.9 volts, then rear marker lights go down to 9.6 volts. Removed all bulbs and still same results. I wish I knew how the wiring runs. Removed a couple marker lights to check wiring but really cannot get to the wiring much. What’s my next step? Sounds like a grounding issue, but pin box ground is perfect. FW always stored in temp controlled environment, practically new condition, with zero corrosion concerns. I appreciate any help. I’m stumped. TIA
__________________
2018 Montana HC 362RD
2016 Chevrolet 3500 Duramax HD SRW
|
|
|
05-17-2023, 04:55 PM
|
#2
|
Seasoned Camper
Join Date: Sep 2019
Location: Port Orchard
Posts: 58
M.O.C. #25024
|
https://www.ajtnt.com/portals/ajstru...-Diagram-1.png
Shows the wiring for your 7 pin plug. Which power source do you have your backup camera running off of?
__________________
2016 305RL
2018 Ram 2500 Laramie
Curt 25 Hitch on factory puck
|
|
|
05-17-2023, 06:23 PM
|
#3
|
Montana Fan
Join Date: Jan 2018
Location: Boone
Posts: 311
M.O.C. #21011
|
Quote:
Originally Posted by Stix
|
It is my understanding Montana wires the Furrion pre wired plug to the top center clearance light. Unless someone knows any difference.
__________________
2018 Montana HC 362RD
2016 Chevrolet 3500 Duramax HD SRW
|
|
|
05-17-2023, 06:42 PM
|
#4
|
Montana Master
Join Date: Mar 2019
Location: Milwaukie, OR
Posts: 1,485
M.O.C. #23668
|
You might check with your local GM dealership about the stock voltage to the 7way plug. I don't know what year they started reducing voltage since they use LED lights throughout but I've seen discussions about needing a special adapter in order to get 12 volts to the plug for your trailer.
__________________
Jeff & Sandi (and Teddy - 7lb Schnorkie)
2018 Montana HC 305RL / HW Progressive EMS
2015 RAM 3500 Laramie Longhorn Crew Cab 4x4 DRW / Demco Recon Hitch on RAM Puck Ball
|
|
|
05-17-2023, 07:29 PM
|
#5
|
Montana Fan
Join Date: Jan 2018
Location: Boone
Posts: 311
M.O.C. #21011
|
Quote:
Originally Posted by jsb5717
You might check with your local GM dealership about the stock voltage to the 7way plug. I don't know what year they started reducing voltage since they use LED lights throughout but I've seen discussions about needing a special adapter in order to get 12 volts to the plug for your trailer.
|
I was also reading that GM was tweaking their lighting voltages and looks like it started after 2017 or later. Measuring out of my 7 way plug to ground I’m getting 12.8 volts.
__________________
2018 Montana HC 362RD
2016 Chevrolet 3500 Duramax HD SRW
|
|
|
05-17-2023, 08:15 PM
|
#6
|
Montana Master
Join Date: Mar 2019
Location: Milwaukie, OR
Posts: 1,485
M.O.C. #23668
|
Quote:
Originally Posted by Jamesb
I was also reading that GM was tweaking their lighting voltages and looks like it started after 2017 or later. Measuring out of my 7 way plug to ground I’m getting 12.8 volts.
|
Well, bummer. I thought it might be an easy fix but looks like you have some voltage loss from the plug back. Frayed wire or loose ground?
__________________
Jeff & Sandi (and Teddy - 7lb Schnorkie)
2018 Montana HC 305RL / HW Progressive EMS
2015 RAM 3500 Laramie Longhorn Crew Cab 4x4 DRW / Demco Recon Hitch on RAM Puck Ball
|
|
|
05-18-2023, 06:22 AM
|
#7
|
Montana Master
Join Date: Dec 2007
Location: Kansas City, Missouri
Posts: 2,710
M.O.C. #7992
|
I had your same experience years ago on my 2006 when installing a back up camera. Had to change all the running lights to LED bulbs and that solved my issue. May not be your issue as you said you saw the drop at the fixtures with all the bulbs pulled. Installed a back up camera for my neighbor on their fifth wheel. Instead of tying it into the running lights we picked up 12 volts off an interior light circuit in his coach. Easy wire fish as his switch was on the rear wall. Ran it to a 12 volt remote relay. He could operate the relay from his truck.
__________________
2006 3000RK
2009 Ram 2500
|
|
|
05-18-2023, 09:09 AM
|
#8
|
Montana Master
Join Date: Apr 2006
Location: Mesa az
Posts: 2,973
M.O.C. #5651
|
Very strange. Seems to me if you get a drop, it would mean there is a short but not a complete short if that is possible. Voltage drops each time there is resistance in the line. So I don't get why it goes down after each light fixture??? I would think the first one should drop it x volts, but that should remain thru the rest of the wiring. Very strange (to me anyway).
__________________
Tom and Gail
2013 Mountaineer 362
2012 Silverado 2500
|
|
|
05-24-2023, 02:06 PM
|
#9
|
Montana Fan
Join Date: Dec 2020
Location: Full Timer
Posts: 120
M.O.C. #27665
|
The voltage drop could also be happening because the wire is too thin (or some of the strands broke) to handle the load. I like the recommendation to tie it to a different 12V source instead of the clearance light...
__________________
Full-Timing since 2018 in a 2013 3625RE, 2023 Ford F450DRW with High Output Diesel,
Custom kingpin-mounted hitch receiver for bike rack 2019
MorRyde I/S with 8K Axles & Goodyear G114 Tires on 17.5” aluminum wheels 2020
FlexArmor roof 2021, Starlink
|
|
|
05-25-2023, 01:57 PM
|
#10
|
Established Member
Join Date: Mar 2022
Location: Royal Oak
Posts: 13
M.O.C. #30672
|
Adapter
Adapter is simply a plug you plug into your truck 7-pin and then plug your rv into that. That’s it. A little over $100.00 bucks
E-trailer has them
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|