I had a bolt back out of one of our jacks many years ago, and I just took a box end wrench on the bolt and tapped the end of the wrench with a hammer several hits so the bolt was being tightened, and the bolts have never come loose again. You could also use Locktight on the threads before crewing the bolt back in, but use the type of Locktight that can be removed. When I tightened the bolts, I did not put a wrench on the rams, so they were not damaged.
__________________
Bob & Becky
2012 3402RL
2012 Chevy 2500HD D/A CC 4WD
|