![Reply](/forums/images/mo/buttons/reply.gif) |
07-27-2010, 03:05 PM
|
#1
|
Montana Fan
Join Date: Jun 2009
Location: Sioux Falls
Posts: 135
M.O.C. #9367
|
Pull Rite Hitch
Just had the Pull Rite Super 18K hitch installed. We are living in an apartment until we pick up our new Monty.
My question is have any of you changed the pins to locks and if so how many locks (2, 4 or 6.
Thanks for the info.
Bill
PS 2 1/2 weeks until we take position of our new home.
|
|
|
07-27-2010, 05:21 PM
|
#2
|
Seasoned Camper
Join Date: Jan 2009
Location: Libby
Posts: 98
M.O.C. #9080
|
The only locks I use is on the release lever. I don't feel it is necessary to put looks on your hold down pins. Good luck to anyone wanting to pull those pins, I am 6'6" and can't reach them in the bed of my truck.
|
|
|
07-28-2010, 03:42 AM
|
#3
|
Montana Fan
Join Date: Nov 2005
Location: Ooltewah
Posts: 360
M.O.C. #4958
|
I put a cable lock through my Reese slider back years ago. Don't think anyone would try to steel it, and it would probably just slow them down. Being a cable, it still allows the slider base to operate.
I agree with Farmhawk, that one of the best things you can do for safety, is put a lock on the release lever, expecially when you are towing. It requires you to ensure that the jaws are properly locked, and it keeps the nosy from pulling the lever while you are in the rest stops or parked elsewhere, which would result in a dropped trailer. I had heard about 4 years ago when I started pulling my Montana, that at a rest area, someone had pulled the release lever on a fifth wheel, then stayed around at a distance to laugh when they dropped the trailer. I still do a walk around and check hitch pin lockup and give the release lever a tug, every time I get ready to roll back out onto the road.
|
|
|
07-28-2010, 10:24 AM
|
#4
|
Montana Master
Join Date: Sep 2008
Location: Bangor
Posts: 770
M.O.C. #8816
|
I locked mine. Used one lock at each level of the hitch. 1 on the head, 1 on the slider portion and 1 on the rails. If somebody wants to steal it it will just take a little longer. As farmhawk said it's a heavy thing. The lock for the handle is a must. I use a hitch pin lock.
kevin
|
|
|
07-28-2010, 02:58 PM
|
#5
|
Montana Master
Join Date: Jun 2010
Location: Colorado Springs
Posts: 3,335
M.O.C. #10496
|
There's a special place in Hades for those kind of low lifes. I too run a padlock through the hole for my release lever every time I hook up. If I make it a habit, I'll do it every time.
Quote:
quote:Originally posted by Devildog
I had heard about 4 years ago when I started pulling my Montana, that at a rest area, someone had pulled the release lever on a fifth wheel, then stayed around at a distance to laugh when they dropped the trailer.
|
__________________
2010 3150RL
LevelUp, Dual 6 volt batteries, Progressive Industries EMS HW50C, Honda EU2000i Generator, Bridgestone Duravis R250 tires, Torklift Glowstep Revolution Stairs, LED Tail lights
2015 RAM 3500 Laramie SRW LB CC Cummins 6.7L Aisin Trans B&W RVK3600
|
|
|
07-28-2010, 04:10 PM
|
#6
|
Montana Master
Join Date: Jan 2004
Location: Down the Road
Posts: 5,627
M.O.C. #889
|
I ran a cable lock through my old Superglide as well as a lock on the release handle after hitching. Neither of the locks would stop someone from stealing the hitch, but as already mentioned, it will at least slow them down or make them think twice.
|
|
|
07-28-2010, 04:33 PM
|
#7
|
Montana Master
Join Date: Feb 2010
Location: Shipman
Posts: 552
M.O.C. #10136
|
farmhawk...where does the lock go in the release lever...I have never used one and don't see a place for a lock...never thought of one before....it is pretty heavy..have not considered anyone stealing it...guess maybe we should check it over better....look at the manual for it...
|
|
|
07-28-2010, 05:24 PM
|
#8
|
Seasoned Camper
Join Date: Jan 2009
Location: Libby
Posts: 98
M.O.C. #9080
|
When the jaws engage around the king pin of the trailer the release handle snaps back in toward the hitch. The slot that the release lever travels in is elongated so when the lever moves back into place there is room above the lever to slip a 1/4" to 5/16" lock. With the lock in place the lever cannot be pulled.
|
|
|
07-29-2010, 04:10 AM
|
#9
|
Montana Master
Join Date: Feb 2010
Location: Shipman
Posts: 552
M.O.C. #10136
|
Farmhawk..thanks for the info..I understand where you are putting the lock...we'll look into doing something....
|
|
|
08-05-2010, 01:12 PM
|
#10
|
Montana Fan
Join Date: Jan 2004
Location: North Charleston
Posts: 106
M.O.C. #768
|
I have a pullrite hitch and I have found that once you pull the trailer forward it is just about impossible to pull the handle. That's why you have to back into the hitch to pull the handle when unhitching. Also, the hitch uses a single "jaw" which rotates around the hitch pin so that there is no way that the jaw can open accidently. I haev been using the same hitch since 2005 and on two Montys. I love the automatic slide feature because I never have to worry about hitting the truck cab.
|
|
|
08-12-2010, 07:33 AM
|
#11
|
Montana Master
Join Date: Oct 2009
Location: Navarre
Posts: 1,527
M.O.C. #9765
|
I use a lock on the release handle for trips since it will deter hooligans from fooling around. I have a 9mm for anyone dumb enough to try and steal the hitch.
Mike
|
|
|
08-12-2010, 10:07 AM
|
#12
|
Montana Fan
Join Date: Jun 2008
Location: Aberdeen
Posts: 198
M.O.C. #8573
|
I too thought once the hitch handle released and snapped shut, it would not open with pressure on the pin. I drove off and at our first stop, I for some reason looked and the handle had come out about 3/4 and was barely hooked. Found out it was a lubrication issue but that is when I started locking it not for anti theft but for peace of mind going down the road!
|
|
|
![Reply](/forums/images/mo/buttons/reply.gif) |
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|