Slide separating at wall and floor

[Rsmarlow82]

Looking for help / input. The rear slide, door side, which is intended for our dining has a major issue . We thought the floor seemed “spongy” near the wall. Further investigation shows the screws that hold the floor to the wall ( a long strip runs parallel to the slide direction) at this junction. This allows daylight to be seen inside unit at the junction of the floor and wall .
Anyone have similar issue ? Any suggestions on repairs ?? Of course warranty is past.

Thoughts and any help appreciated

[bshgto]

Originally Posted by Rsmarlow82

Looking for help / input. The rear slide, door side, which is intended for our dining has a major issue . We thought the floor seemed “spongy” near the wall. Further investigation shows the screws that hold the floor to the wall ( a long strip runs parallel to the slide direction) at this junction. This allows daylight to be seen inside unit at the junction of the floor and wall .
Anyone have similar issue ? Any suggestions on repairs ?? Of course warranty is past.

Thoughts and any help appreciated

Several U-Tube video's on this and why it happens and how to fix it, not to difficult if your handy. Or several thousand dollars to a dealer.

[Rsmarlow82]

Originally Posted by bshgto

Several U-Tube video's on this and why it happens and how to fix it, not to difficult if your handy. Or several thousand dollars to a dealer.

Thank you very much. I Checked out some videos and definitely something I can handle.

Safe travels and thanks again.