|
|
10-25-2023, 02:49 PM
|
#1
|
Established Member
Join Date: Oct 2023
Location: Tallahassee
Posts: 19
M.O.C. #33547
|
Matching Question
I have a 2020 HC 295rl and I'm brand new to all of this, so please excuse my ignorance. I'm having to figure things out for myself.
I want to remove the microwave and utilize that space for a shelf.
Removing the microwave seems simple enough. It's mounted directly to the cabinet above. The advice I'm seeking is:
1) Would you do this yourself?
2) If yes, (or for any other repairs/additions), how can I match it to the existing cabinetry?
The color in my model is a wood grain light gray/beige. What I would call "driftwood".
Any other suggestions/advice are also welcome.
Thank you!
|
|
|
10-25-2023, 04:13 PM
|
#2
|
Montana Master
Join Date: Dec 2009
Location: Sebring
Posts: 3,662
M.O.C. #9969
|
Be advised if you remove the Microwave you'll be left with a hole in the wall where the microwave vents to the outside. At least there is on a normal RV install. Maybe someone with that model will verify.
__________________
Michelle & Ann
2018 Chevy 3500HD High Country DRW 4X4 Crew Cab w/Duramax/Allison, Formally 2010 Montana 2955RL, Now Loaded 2016 SOB, Mor/ryde IS, Disc Brakes & Pin Box, Comfort Ride Hitch, Sailun 17.5 Tires.
|
|
|
10-25-2023, 06:11 PM
|
#3
|
Montana Master
Join Date: Mar 2019
Location: Milwaukie, OR
Posts: 1,475
M.O.C. #23668
|
Yes, there will likely be a vent on the back...easy enough to cover. Just leave the outside vent cover and trim out the interior the way you want. Anything is doable with the right tools and skill set.
Stain matching can be a little tricky but it's doable. Our interior has darker wood. I did some work and had to experiment with different stains and woods to get pretty close. I did it...just took a little time.
Looking at the stain samples on different woods in Home Depot or Lowes was where I started. Take a small cabinet door with you to compare.
__________________
Jeff & Sandi (and Teddy - 7lb Schnorkie)
2018 Montana HC 305RL / HW Progressive EMS
2015 RAM 3500 Laramie Longhorn Crew Cab 4x4 DRW / Demco Recon Hitch on RAM Puck Ball
|
|
|
10-25-2023, 06:58 PM
|
#4
|
Montana Master
Join Date: Jan 2022
Location: Shingle Springs
Posts: 2,264
M.O.C. #30417
|
Quote:
Originally Posted by GigiGetsAround
I have a 2020 HC 295rl and I'm brand new to all of this, so please excuse my ignorance. I'm having to figure things out for myself.
I want to remove the microwave and utilize that space for a shelf.
Removing the microwave seems simple enough. It's mounted directly to the cabinet above. The advice I'm seeking is:
1) Would you do this yourself?
2) If yes, (or for any other repairs/additions), how can I match it to the existing cabinetry?
The color in my model is a wood grain light gray/beige. What I would call "driftwood".
Any other suggestions/advice are also welcome.
Thank you!
|
Hi Gigi, I have the same model. There is no vent on the microwave on this model. Should be easy to remove. Not sure what the wall behind it looks like. May have to do some cosmetics. As far as matching the finish, I'd order a panel from a keystone dealer. They typically have material in stock for repairs. At least mine does. Feel free to ask away. I know mine inside and out. Most of it
__________________
Tony & Donna
2022 Montana HC, 295RL, Solar Flex 400, Onan 3600 LPG, 2K inverter, 200AH Lithium. 2020 GMC Denali 2500 6.6 Duramax, Demco 21K Auto Slide
|
|
|
10-25-2023, 06:59 PM
|
#5
|
Montana Master
Join Date: Jan 2018
Location: Austin
Posts: 2,432
M.O.C. #21044
|
I just googled REPLACE MICROWAVE here in the forum and read a few threads on the subject. The microwave is heavy…maybe a two person job. Put blocks under it to hold it up before you remove the top bolts…then lift it off the wall bracket.
Here are some pics of what you might find behind your microwave. Concerning matching the stain - I just saw this on a YouTube video from CHANGING LANES YouTube channel. In his newest video he shows how he matched the stain on a “cabinet door” he added in his Grand Design fifth wheel. It might not be your exact color - but you will need to go thru the same process until you come up with a satisfactory match in your eyes. I have no idea if Keystone will provide you with a stain color name or number - but I would not count on it. Adding a shelf and getting the stain right would test my carpentry skills.
__________________
MikenDebbie Aggie ‘77 in the sticks near Austin TX
2019 Chevy 3500 High Country DRW
2018 Montana 3921FB
Aussie Gus + Texas Heeler Jimmy
|
|
|
10-25-2023, 07:04 PM
|
#6
|
Montana Master
Join Date: Jan 2022
Location: Shingle Springs
Posts: 2,264
M.O.C. #30417
|
She has a HC, not stained wood. Veneered and no vent. The ash finish is still used and available.
__________________
Tony & Donna
2022 Montana HC, 295RL, Solar Flex 400, Onan 3600 LPG, 2K inverter, 200AH Lithium. 2020 GMC Denali 2500 6.6 Duramax, Demco 21K Auto Slide
|
|
|
10-25-2023, 07:26 PM
|
#7
|
Montana Master
Join Date: Apr 2006
Location: Mesa az
Posts: 2,960
M.O.C. #5651
|
Don't know if you noticed, but the last picture above shows the metal mounting bracket that the microwave hooks on. Mounting involves hooking the back of the unit on to this metal strip and then lifting up the front of the unit and bolt it solid.
So not sure how you get rid of this metal strip and make it look nice.
__________________
Tom and Gail
2013 Mountaineer 362
2012 Silverado 2500
|
|
|
10-26-2023, 03:41 AM
|
#8
|
Established Member
Join Date: Oct 2023
Location: Tallahassee
Posts: 19
M.O.C. #33547
|
Quote:
Originally Posted by mhs4771
Be advised if you remove the Microwave you'll be left with a hole in the wall where the microwave vents to the outside. At least there is on a normal RV install. Maybe someone with that model will verify.
|
Thank you!
|
|
|
10-26-2023, 03:42 AM
|
#9
|
Established Member
Join Date: Oct 2023
Location: Tallahassee
Posts: 19
M.O.C. #33547
|
Quote:
Originally Posted by jsb5717
Yes, there will likely be a vent on the back...easy enough to cover. Just leave the outside vent cover and trim out the interior the way you want. Anything is doable with the right tools and skill set.
Stain matching can be a little tricky but it's doable. Our interior has darker wood. I did some work and had to experiment with different stains and woods to get pretty close. I did it...just took a little time.
Looking at the stain samples on different woods in Home Depot or Lowes was where I started. Take a small cabinet door with you to compare.
|
Thank you so much. Great advice.
|
|
|
10-26-2023, 03:44 AM
|
#10
|
Established Member
Join Date: Oct 2023
Location: Tallahassee
Posts: 19
M.O.C. #33547
|
Quote:
Originally Posted by Foldbak
Hi Gigi, I have the same model. There is no vent on the microwave on this model. Should be easy to remove. Not sure what the wall behind it looks like. May have to do some cosmetics. As far as matching the finish, I'd order a panel from a keystone dealer. They typically have material in stock for repairs. At least mine does. Feel free to ask away. I know mine inside and out. Most of it
|
I will reach out to them. It seems that may be the simplest route. I really appreciate your help.
|
|
|
10-26-2023, 03:48 AM
|
#11
|
Established Member
Join Date: Oct 2023
Location: Tallahassee
Posts: 19
M.O.C. #33547
|
Quote:
Originally Posted by twindman
Don't know if you noticed, but the last picture above shows the metal mounting bracket that the microwave hooks on. Mounting involves hooking the back of the unit on to this metal strip and then lifting up the front of the unit and bolt it solid.
So not sure how you get rid of this metal strip and make it look nice.
|
Once I get the microwave out I'll be able to make a better decision. I may remove the bracket, fill the holes and yhen just use a piece to cover it as a backing to the shelf. I think that will look the least "edited".
|
|
|
10-26-2023, 05:28 AM
|
#12
|
Montana Master
Join Date: Oct 2019
Location: Jacksonville
Posts: 2,149
M.O.C. #25165
|
You can probably find a "peel and stick" type of tile to look good with your existing backsplash and put it over the area where the microwave was located. Depending upon your shelf and how you utilize the space, a simple 1/4" plywood stained to match might work to suffice.
__________________
Robert & Diana McNeal
2019 Montana Legacy 3791RD 20th Anniversary Edition
2014 F350 4x4 6.7L SRW
|
|
|
10-26-2023, 09:20 AM
|
#13
|
Established Member
Join Date: Oct 2023
Location: Tallahassee
Posts: 19
M.O.C. #33547
|
Quote:
Originally Posted by RMcNeal
You can probably find a "peel and stick" type of tile to look good with your existing backsplash and put it over the area where the microwave was located. Depending upon your shelf and how you utilize the space, a simple 1/4" plywood stained to match might work to suffice.
|
That's a great idea. Thank you!
|
|
|
10-29-2023, 06:57 PM
|
#14
|
Montana Fan
Join Date: Jul 2016
Location: Georgetown
Posts: 307
M.O.C. #18751
|
Gigi, my suggestion is to remove the microwave. Then build a shelving unit with a back on it to cover whatever needs to be covered up. Go to Home Depot with one of your cabinet doors and they will match it for you. When you remove the rail from the wall make note of where the screws are and this can be a guide to where you will screw your shelving to the wall. If nothing else, with the shelving unit having a back, you can poke all kinds of holes to find the studs. Paint the unit before mounting.
Good luck!
|
|
|
10-30-2023, 07:13 AM
|
#15
|
Montana Fan
Join Date: Jun 2018
Location: Jacksonville
Posts: 383
M.O.C. #21993
|
Keep in mind that a wood shelf will be less forgiving of the stove heat than the microwave is, and since there will no longer be a vent to disperse the heat, it could get very warm and damage the new wood.
__________________
I was once intelligent beyond my years. Now, I’m years beyond my intelligence.
2020 Montana 3561 Legacy, everything except paint.
2018 Silverado 3500 DRW, 50Gal Transfer Flow, Andersen hitch.
|
|
|
10-30-2023, 08:37 AM
|
#16
|
Established Member
Join Date: Mar 2021
Location: Allen
Posts: 31
M.O.C. #28272
|
Trekwood RV Parts
You can usually find replacement parts, trim, panels, etc. at a Keystone dealer or at Trekwood RV Parts (Trekwood.com).
|
|
|
10-30-2023, 09:22 AM
|
#17
|
Seasoned Camper
Join Date: Sep 2022
Location: Gilford
Posts: 62
M.O.C. #31705
|
Gigi, we also have the same model as you have. Here is a photo of our stove area without the microwave mounted. You can clearly see the mounting bar. My wife just purchased some peel and stick tiles to change up the color of the backsplash. That is an alternative for you as well. Good luck!
__________________
Gerry & Susie
2022 Montana High Country 295RL, SolarFlex 400i, slide toppers, Lithium batteries…
2021 RAM 2500 6.7 Cummins, Airlift 5000, PullRite Superglide #2315
|
|
|
10-30-2023, 12:20 PM
|
#18
|
Established Member
Join Date: Oct 2023
Location: Tallahassee
Posts: 19
M.O.C. #33547
|
Quote:
Originally Posted by Byron B
Gigi, my suggestion is to remove the microwave. Then build a shelving unit with a back on it to cover whatever needs to be covered up. Go to Home Depot with one of your cabinet doors and they will match it for you. When you remove the rail from the wall make note of where the screws are and this can be a guide to where you will screw your shelving to the wall. If nothing else, with the shelving unit having a back, you can poke all kinds of holes to find the studs. Paint the unit before mounting.
Good luck!
|
Thank you so much! I really appreciate your suggestions!
|
|
|
10-30-2023, 12:21 PM
|
#19
|
Established Member
Join Date: Oct 2023
Location: Tallahassee
Posts: 19
M.O.C. #33547
|
Quote:
Originally Posted by GreG L.
Keep in mind that a wood shelf will be less forgiving of the stove heat than the microwave is, and since there will no longer be a vent to disperse the heat, it could get very warm and damage the new wood.
|
That's a very good point. I'll have to watch out for that.
|
|
|
10-30-2023, 12:22 PM
|
#20
|
Established Member
Join Date: Oct 2023
Location: Tallahassee
Posts: 19
M.O.C. #33547
|
Quote:
Originally Posted by Bruce in DFW
You can usually find replacement parts, trim, panels, etc. at a Keystone dealer or at Trekwood RV Parts (Trekwood.com).
|
What a great resource suggestion! Thank you! (noted)
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|