|
02-13-2022, 09:59 AM
|
#1
|
Established Member
Join Date: Jun 2021
Location: Colorado
Posts: 23
M.O.C. #28930
|
Insect Screens for Norcold Refrigerator Vent
I have two vented covers for my 12 gallon Norcold RV refrigerator (see photo). The dealer had insect screens for the long vents on the right side, but could not find anything that is the exact length (6 1/2”) for the short vents on the left side. Is it possible the covers are for a different brand refrigerator? Any recommendation for a source?
__________________
2022 Montana 3121RL Legacy SolarFlex 1200i-L
2022 Ford F-350 Lariat 4x4 SRW SB 6.7L TurboDiesel
|
|
|
02-13-2022, 10:07 AM
|
#2
|
Montana Master
Join Date: Feb 2007
Location: San Jose
Posts: 527
M.O.C. #6790
|
Google these: Camco-42148-Flying-Insect-Screen
__________________
2006 Montana 3650RK with Improvements.
2014 Ford 6.7L PSD 4WD CC LB Dually & Hadley's.
|
|
|
02-13-2022, 10:26 AM
|
#3
|
Montana Master
Join Date: Jun 2018
Location: Carson City
Posts: 2,017
M.O.C. #21963
|
Bug screens are fine but be advised that Norcolds mounted in slideouts often experience cooling problems. Many times it is due to poor air circulation behind the fridge. The issue can be found in a forum search. Adding screens may or may not affect the cooling ability of your particular unit. Just something to be aware of.
__________________
2016 3160, Legacy, Sailuns, Splendide 2100 xc vented, 1 1/2" axle lift blocks, disk brakes. 2014 Ram 3500 SRW SWB 4X4 6.7 Aisin Mega Cab, EBC slotted disks and brakes, Titan fuel tank.
|
|
|
02-13-2022, 11:04 AM
|
#4
|
Site Team
Join Date: Jun 2011
Location: Wilsey
Posts: 18,799
M.O.C. #11455
|
Ours have always been screened in all of our Monty's without a problem. When I couldn't get ones that fit, I'd just buy the 20" set of three from Amazon for $10 and cut them to fit.
__________________
Dick, Joyce, Diego, Picatso and Gustav
2017 3720 RL, and 2013 HC 343RL
Pullrite Hitch, IS, Disk Brakes, 3rd AC, Winegard Traveler, Bathroom door mod, Dometic 320, couch for desk swap, replaced chairs, sun screens, added awnings, etc.
|
|
|
02-13-2022, 12:13 PM
|
#5
|
Montana Master
Join Date: Oct 2004
Location: Salem
Posts: 7,552
M.O.C. #2283
|
I’ve made my own also. I put a small bead of silicone around the outside edge and press the screen into it. Cheap, easy and works.
Lynwood
|
|
|
02-13-2022, 12:25 PM
|
#6
|
Montana Master
Join Date: May 2019
Location: Alton
Posts: 2,703
M.O.C. #24086
|
I used nylon window screen. Cut to fit then hot glue to the inside of each slit.
__________________
Daryl and Marianne,
2019 3130re 20th Anniversary Edition
2016 F350 Lariat
|
|
|
02-22-2022, 12:29 PM
|
#7
|
Established Member
Join Date: Oct 2021
Location: Willard
Posts: 23
M.O.C. #29987
|
Check your drip tube
Quote:
Originally Posted by ScottN
I have two vented covers for my 12 gallon Norcold RV refrigerator (see photo). The dealer had insect screens for the long vents on the right side, but could not find anything that is the exact length (6 1/2”) for the short vents on the left side. Is it possible the covers are for a different brand refrigerator? Any recommendation for a source?
|
Mine had the screens installed and they move the drip tube inside with no pan to catch the water. I had to cut a small hole in one of the screens and move the tube back outside.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|