Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 

Go Back   Montana Owners Club - Keystone Montana 5th Wheel Forum > GENERAL DISCUSSIONS > General Discussions about our Montanas
Click Here to Login

Reply
 
Thread Tools Search this Thread Display Modes
 
Old 06-07-2023, 01:55 PM   #1
Baldicon
Montana Master
 
Baldicon's Avatar
 
Join Date: Dec 2017
Location: Chattanooga
Posts: 688
M.O.C. #20906
Torque wheels after removal

I have followed the Lippert recommendations for torqueing the wheels. It also recommends stopping at 10-25-50 miles to check torque. We leave tomorrow morning and I plan on following their recommendations. The biggest problem is finding somewhere safe to pull off and check. But have to ask the question, is this really necessary?

Thanks
__________________
2019 Montana 3121RL
2017 XLT 350 SCLB DRW 4X4
Baldicon is offline   Reply With Quote
Old 06-07-2023, 02:14 PM   #2
AZMont
Seasoned Camper
 
Join Date: May 2020
Location: Chandler
Posts: 81
M.O.C. #26281
Whenever I take a TV wheel off, have always torqued the lug nuts to spec. I even bought a larger torque wrench so it is easier to apply the high levels of torque required. But, I only do it 1x. Have never had any issues in 24 years of RV'ing. I can see why they recommend checking after you drive a bit, but 4 times (initial + the mileage intervals) seems like a lot.
__________________
AZMont
2020 Ram 3500 MegaCab HO Diesel 4x4 SRW
2015 3100 RL, Onan 4500i inverter/generator
AZMont is offline   Reply With Quote
Old 06-07-2023, 02:17 PM   #3
steiny93
Montana Fan
 
Join Date: May 2015
Location: fargo
Posts: 187
M.O.C. #17461
Quote:
Originally Posted by Baldicon View Post
I have followed the Lippert recommendations for torqueing the wheels. It also recommends stopping at 10-25-50 miles to check torque. We leave tomorrow morning and I plan on following their recommendations. The biggest problem is finding somewhere safe to pull off and check. But have to ask the question, is this really necessary?

Thanks
I personally have not stopped after a tire change to retorque lugs; but it can't be a bad idea.
steiny93 is offline   Reply With Quote
Old 06-07-2023, 02:22 PM   #4
LeftOverParts
Montana Fan
 
Join Date: Jan 2023
Location: Orange County, CA
Posts: 255
M.O.C. #32230
Well, when a shop replaces tires or does bearings/brakes, I wonder if folks check the torque after a few miles.

I’m from a mfrg engrg background so inclined towards following the recommendations of mfrs and pros. So, I went ahead and checked torques after recently DIYing the bearing repack. I was able to find enough places on the road to do this safely - super wide (like triple wide) shoulders, gas station, large parking lot, etc. It doesn’t take very long - 10 mins? 1 or 2 nuts out of 32 turned a few degrees on the first stop.
__________________
2021 3231CK, Legacy - dual panes, Kodiak 250 discs, slide awnings, iN-Command, TST-507, 206 Ah SOK LiPo, AC soft start on rear, Starlink RV
2021 F350 SRW CC, 6.7, LB, 4360 pyld, 2800 lb rear SumoSprings, spray on bedliner, 19K Demco Recon on factory pucks, CA non-commercial Class A
LeftOverParts is offline   Reply With Quote
Old 06-07-2023, 02:38 PM   #5
Carl n Susan
Site Team
 
Carl n Susan's Avatar
 
Join Date: Oct 2005
Location: Carmichael - CA
Posts: 7,841
M.O.C. #4831
The aluminum (or whatever material) rims are known to loosen after installing. I always check the torque but more like at 50 & 100 miles.
__________________
Carl (n Susan)
There is more to life than fuel mileage.
2012 Montana 3700RL Big Sky Package towed by a 2015 Ford F350 6.7L PSD 4WD CC LWB

Carl n Susan is online now   Reply With Quote
Old 06-07-2023, 02:47 PM   #6
Theunz
Montana Master
 
Theunz's Avatar
 
Join Date: Mar 2016
Location: Catoosa
Posts: 789
M.O.C. #18384
I would torque them before I left and then just enjoy my trip. I’m willing to bet the transport driver didn’t stop and check them on his way to the dealer.
__________________
2015 3100RL legacy...2005 Ford F-250 CC SB. Tows like a charm! 4/19 Updated to 2017 Chevy 3500 CC SB SRW -hope it tows as well as my F 250 did!
Theunz is offline   Reply With Quote
Old 06-07-2023, 05:57 PM   #7
MandK
Montana Master
 
Join Date: Mar 2021
Location: Western NY
Posts: 587
M.O.C. #28430
It’s a little more important to do the 10, 25, 50 mile thing when new. And yes I agree that the delivery drivers probably don’t do it but as an example my lugs didn’t budge after reinstalling drums to pack wheel bearings the first time, but when I converted to disc brakes and 8000# wheel ends, I got some loosening the first time out. Now they are set and haven’t loosened since the initial torque sequence. The new lugs stretch a bit and then stop I think.
__________________
Mark & Karen
2021 3121rl - slide toppers, cottage white, X-Factors, disc brakes, 300ah Lithium, DC/DC charging, Gen-Y pinbox. 2021 F-350, 6.7L, SRW CC LB - B&W Companion
MandK is offline   Reply With Quote
Old 06-07-2023, 06:12 PM   #8
mhs4771
Montana Master
 
mhs4771's Avatar
 
Join Date: Dec 2009
Location: Sebring
Posts: 3,669
M.O.C. #9969
I would check them very shortly after install.
Saw a car get front ended by a loose tire/wheel combo from a car that had just left the tire store.
Then I would just do a quick double check at a rest area down the road.
__________________
Michelle & Ann
2018 Chevy 3500HD High Country DRW 4X4 Crew Cab w/Duramax/Allison, Formally 2010 Montana 2955RL, Now Loaded 2016 SOB, Mor/ryde IS, Disc Brakes & Pin Box, Comfort Ride Hitch, Sailun 17.5 Tires.
mhs4771 is offline   Reply With Quote
Old 06-07-2023, 06:48 PM   #9
mlh
Montana Master
 
Join Date: Oct 2004
Location: Salem
Posts: 7,738
M.O.C. #2283
I would do a recheck but are they going to come off nope not a chance.
Lynwood
__________________
www.harrellsprec.com
Lynwood Harrell
323 RL HC 2008 F250
mlh is offline   Reply With Quote
Old 06-07-2023, 07:44 PM   #10
Foldbak
Montana Master
 
Foldbak's Avatar
 
Join Date: Jan 2022
Location: Shingle Springs
Posts: 2,758
M.O.C. #30417
I just re-torqued mine. 2 were slightly loose. I check every other trip or 800 miles. Takes 5 minuets.
__________________
Tony & Donna & the best dog ever, Murphy.
2022 Montana HC, 295RL, 720 watts Solar, Onan 3600 LPG, 2K inverter, 200AH Lithium. 2020 GMC Denali 2500 6.6 Duramax, Demco 21K Auto Slide
Foldbak is offline   Reply With Quote
Old 06-07-2023, 08:17 PM   #11
rohrmann
Montana Master
 
rohrmann's Avatar
 
Join Date: Oct 2012
Location: Box Elder
Posts: 4,776
M.O.C. #12947
The reason aluminum trailer wheels need to be torqued multiple times after re-installation and occasionally afterwards is due to the side stresses on the wheels that don't happen to cars or trucks. These side stresses are also what causes scrubbing to the tires when making turns with the trailer. The side stresses cause the lug nuts to loosen because the aluminum actually moves a bit under the nuts. The last thing anybody wants is to see one of the trailer wheels passing you on the highway and possibly crashing into another vehicle. Checking torque is cheap and it doesn't have to be done at those exact intervals, just the next stop usually works for me, and I have regularly have found some where I get a bit more of a turn on them.
__________________
Bob & Becky
2012 3402RL
2012 Chevy 2500HD D/A CC 4WD
rohrmann is offline   Reply With Quote
Old 06-09-2023, 08:09 AM   #12
Wisconsin Retiree
Montana Fan
 
Wisconsin Retiree's Avatar
 
Join Date: Jan 2021
Location: Coloma, Wisconsin
Posts: 211
M.O.C. #28036
After removal and replace I also do the 100 mile check.
__________________
Chuck
2019 3121RL 35 ft., 2020 3500 Dodge Ram SRW, Cummins 6.7 HO, Air Bags - Air Lift BT Wireless Compressor, Coloma, Wisconsin
Wisconsin Retiree is offline   Reply With Quote
Old 06-10-2023, 12:20 PM   #13
Rondo
Site Team
 
Join Date: Aug 2007
Location: Omaha
Posts: 6,810
M.O.C. #7560
I do the check a 25 or close to that when I come upon a rest area I can pull into or an exit that has a large parking lot near it after I've had tires off. I check them before the initial roll out, the 25 mile point, and when I stop for the night again. I try and check them before leaving the next day also. I might be overdoing it but better safe than sorry!
Rondo is offline   Reply With Quote
Old 06-10-2023, 02:32 PM   #14
Daryles
Montana Master
 
Daryles's Avatar
 
Join Date: May 2019
Location: Alton
Posts: 2,969
M.O.C. #24086
CHECK TORQUE ON EVERYTHING.
Wheels, suspension, leaf spring bolts, U bolt nuts.
You would be surprised that they can work their way loose after a while.
__________________
Daryl and Marianne,
2019 3130re 20th Anniversary Edition
2016 F350 Lariat
Daryles is offline   Reply With Quote
Old 06-10-2023, 05:12 PM   #15
Foldbak
Montana Master
 
Foldbak's Avatar
 
Join Date: Jan 2022
Location: Shingle Springs
Posts: 2,758
M.O.C. #30417
Quote:
Originally Posted by Daryles View Post
CHECK TORQUE ON EVERYTHING.
Wheels, suspension, leaf spring bolts, U bolt nuts.
You would be surprised that they can work their way loose after a while.
You're correct. When I replaced one brake assemble due to the lining coming unbonded I found one of the backing plate nuts loose.
__________________
Tony & Donna & the best dog ever, Murphy.
2022 Montana HC, 295RL, 720 watts Solar, Onan 3600 LPG, 2K inverter, 200AH Lithium. 2020 GMC Denali 2500 6.6 Duramax, Demco 21K Auto Slide
Foldbak is offline   Reply With Quote
Old 06-14-2023, 02:07 PM   #16
Waricha
Seasoned Camper
 
Join Date: Oct 2017
Location: Blossvale
Posts: 61
M.O.C. #20684
I usually go 50 miles or so and look for the next rest area to pull off and check. I keep torqueing the bolts until they are set after checking 2 more times. After that, I don't worry about it anymore. It has worked for me for decades.
Waricha is offline   Reply With Quote
Old 06-14-2023, 05:30 PM   #17
DebNJim B
Montana Master
 
DebNJim B's Avatar
 
Join Date: Jan 2018
Location: Northville, NY
Posts: 831
M.O.C. #21158
I now retorque after anyone else has touched my vehicle. Had new tires installed on my TV and a week later heading out with the trailer connected felt a strange sensation and finally stopped to check it out. A guy who was following me pulled over and told me the left rear wheel of my truck was wobbling. Sure enough the mechanic must have gotten called off to the phone or something and hadn't torqued that wheel. By the time I caught it the wheel was ruined. The tire store was very apologetic and of course replaced it at their cost. Had I retorqued after 25-50 miles I would have found the issue before it damaged the wheel.

Having said that I've always checked the torque before I leave with the trailer and have never found a nut not to spec.
__________________
Jim B
2017 Lariat F-350 FX4, CC, SB, 6.7 PSD 4WD
2018 MONTY 3731FL, at our private winter site in GA

DebNJim B is offline   Reply With Quote
Old 06-15-2023, 09:08 AM   #18
laverdur
Montana Fan
 
Join Date: Nov 2011
Location: Albany
Posts: 409
M.O.C. #11972
My experience with two RVs and 150,000 miles of towing is that it takes four torque sequences to reach the point that the lug nuts will not tighten any more. From that point going forward, I check the torque at 1,000 mile intervals. My logic - better safe than sorry.
__________________
2012 3150RL. G614 tires. Hardwired surge protector. Level-Up Hydraulic leveling.
2013 F-350 Lariat 6.7 PSD SRW SC LB 4X4 OEM hitch, air self-leveling on rear. 57-gallon replacement fuel tank. DieselSite water separator/fuel filter.
laverdur is offline   Reply With Quote
Old 06-15-2023, 09:37 AM   #19
Lee-CI
Montana Master
 
Lee-CI's Avatar
 
Join Date: Dec 2021
Location: Northeast TX
Posts: 1,018
M.O.C. #30262
Just put on 4 new Sailuns prior to our current trip, following the recommended mileage / re-torque sequence and glad we did so. Afterwards recheck torque prior to each trip as well as after arriving at our destination. Reasoning being paranoid / OCD...
__________________
Lee, Edith, Lil' Bit & Cuddles
22 MHC 331RL, Surge Guard 35550, SumoSprings, Kodiak disc brakes, 412Ah Lithium, Gen 3 Goosebox, Sailun 85s
22 Ram 3500 CC DRW 6.7 CTD Herrin Hauler Classic Bed, 45 gal AUX tank
Lee-CI is offline   Reply With Quote
Old 06-17-2023, 08:23 AM   #20
bshgto
Montana Master
 
bshgto's Avatar
 
Join Date: Oct 2014
Location: Hagerstown
Posts: 921
M.O.C. #16013
maybe?

Every once and a while I`ve noticed a camper guy in a camp ground or rest stop torquing they`re lug nuts. But Ive never noticed a motor home do the same thing, same aluminum wheel and idea? So the guy next to me has a motorhome and I asked him if he ever retorqued the lug nuts after a tire change he said don`t have a torque wrench that will go to the required torque and have never been told to do it after a change or flat.
Some thing is different or the lawyers have put their finger in it.
__________________
2018.5 3791 Rear Den Montana, on the lake no 3rd A/C, Mini Split
Electric Brakes ..... Disk Brakes, it`s the only way
F350 Ford Dually 4:10`s w/bags (payload 5595 lbs) Sumo Springs 63 gal aux tank
Reese Goosebox Mor/Ryde SRE 4000 X Factors Monroe shocks.... real smooth ride
bshgto is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by Montana RV, Keystone RV Company or any of its affiliates. This is an independent, unofficial site.


All times are GMT -6. The time now is 09:09 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.