Any additional outlet should be 50 amp that way you can use it for better access to the shore power pedestal or use a 30 to 50 dog bone to hook to the generator.
I added 2 additional 50 amp plugs 1 at midships on driver side with a auto transfer switch between that one and the OEM plug at the rear.
I also mounted a 50 amp in the kingpin to hook up the generator in the truck bed to the RV to use while on the road either moving or stopped in rest areas etc. I put another auto transfer switch between the kingpin plug and the transfer switch from the 2 aft plugs, from that one I go to my go-power 3000 inverter, and then inverter to main panel.
I can use all 3 plugs for either shore power or generator.
I prefer not to have to use extension cords due to power loss over distance and heat build up.
I chose the Go Power 3000 as it will feed both legs of the main panel.
__________________
2011 RAM / airbags / Anderson Ult. hitch / 2017 Montana 3721RL/Disc brakes, oil-bath Timkin bearings, shocks, X-factor/Tank-less water heater and built in water softener/Barker auto drain valves/4x100 amp Battle born/Go-power 3000 whole rig inverter/all LED running lights and a lot more.
|