It’s long but here’s a post that might be helpful.
Your’s might be a different problem but I found that many of our hinge screws were stripped and the door was leaning towards the latch side doing what you described. I added larger diameter screws (#10) to pull the hinges in tight. Note that same size but longer screws will not help. Then added Irollmans all-thread fix to help it be permanent. Once fixed, we keep the hinges and door latch/lock lubed with graphite lock lube. No problems since the fix and still working well.
https://www.montanaowners.com/forums...ain+entry+door
__________________
2021 3231CK, Legacy - dual panes, Kodiak 250 discs, slide awnings, iN-Command, TST-507, 206 Ah SOK LiPo, AC soft start on rear, Starlink RV
2021 F350 SRW CC, 6.7, LB, 4360 pyld, 2800 lb rear SumoSprings, spray on bedliner, 19K Demco Recon on factory pucks, CA non-commercial Class A
|