 |
12-03-2023, 07:02 AM
|
#1
|
|
Montana Fan
Join Date: Apr 2019
Location: Sugar camp
Posts: 104
M.O.C. #23908
|
Bathroom door Pivot hinge is loose
Not the roller but the top pivot hinge is loose, trying to avoid removing wood trim strip. What does the pivot hinge look like. Do you think I could drill a hole to line up with screws so I could tighten the close hole up.
|
|
|
|
12-03-2023, 07:45 AM
|
#2
|
|
Montana Master
Join Date: Oct 2018
Location: Anderson
Posts: 2,596
M.O.C. #22835
|
The shaft that supports the door from the top has a nut on the top of it that slides in a slot allowing the door to open and close. That nut is loose and needs to be tightened down. Access is near impossible unless you remove the trim above the door.
When I replaced the trim, I removed all the old staples completely and re-installed that top piece with two small wood screws only. At first I thought the screws were too short and wouldn't hold, but that was 2 years and thousands of miles ago. It hasn't fallen off (yet). I figure, if I ever have to adjust it again, access will be much, much easier the next time.
__________________
Who you are right now is a sum total off all you use to be.
2019 Montana High Country 375FL
2014 Chevy Silverado Duramax, 6.6L Dually
|
|
|
|
|
12-03-2023, 07:47 AM
|
#3
|
|
Montana Master
Join Date: Dec 2021
Location: Northeast TX
Posts: 944
M.O.C. #30262
|
We don't have a pivot point door, but the search function came up with this thread with a lot of useful info
https://www.montanaowners.com/forums...ad.php?t=66779
__________________
 Lee, Edith, Lil' Bit & Cuddles
22 MHC 331RL, Surge Guard 35550, SumoSprings, Kodiak disc brakes, 412Ah Lithium, Gen 3 Goosebox, Sailun 85s
22 Ram 3500 CC DRW 6.7 CTD Herrin Hauler Classic Bed, 45 gal AUX tank
|
|
|
|
|
12-03-2023, 08:29 AM
|
#4
|
|
Montana Fan
Join Date: Jun 2014
Location: Kamiah
Posts: 332
M.O.C. #14438
|
Pivot Door was one of the first things I changed on our rig when it was new. Glad I did every time I go into the bathroom.
__________________
Ron&Sue
2017 Montana 3720RL Legacy
14' Ram 3500 DRW
|
|
|
|
|
12-03-2023, 09:36 AM
|
#5
|
|
Montana Fan
Join Date: Dec 2019
Location: Rockford
Posts: 149
M.O.C. #25520
|
We have a 2019 3791RD and our pivot is accessible from the bathroom side. Our thread was stripped so we reversed the bolt so it fed from the top down and put a threaded nut on the bottom. Easiest fix ever.
|
|
|
|
|
12-03-2023, 11:21 AM
|
#6
|
|
Site Team
Join Date: Oct 2005
Location: Carmichael - CA
Posts: 7,369
M.O.C. #4831
|
Quote:
Originally Posted by Lee-CI
|
The Pivot Door has generated lots of discussion. The Thread that Lee-CI pointed out is the best information you will find.
__________________
Carl (n Susan)
There is more to life than fuel mileage.
2012 Montana 3700RL Big Sky Package towed by a 2015 Ford F350 6.7L PSD 4WD CC LWB
|
|
|
|
|
12-06-2023, 02:40 PM
|
#7
|
|
New Member
Join Date: Jul 2020
Location: Sun Prairie
Posts: 3
M.O.C. #26791
|
pivot door
My wife and I really ...really dislike our pivot door.
About ready to replace it with a curtain rod and a heavy curtain.
Unless someone has a better solution. A pocket door would have made total sense in that application
|
|
|
|
|
12-06-2023, 02:50 PM
|
#8
|
|
Site Team
Join Date: Sep 2017
Location: Oro Valley
Posts: 3,933
M.O.C. #20477
|
Quote:
Originally Posted by Jeff & Gail
Not the roller but the top pivot hinge is loose, trying to avoid removing wood trim strip. What does the pivot hinge look like. Do you think I could drill a hole to line up with screws so I could tighten the close hole up.
|
Have you installed the newer hardware available from Morryde? I have been very happy with ours since installing the new hardware.
__________________
Zack and Donna plus Millie and Ranger
2018 3160RL
"Life is too short to stay indoors, enjoy the ride!"
|
|
|
|
|
12-06-2023, 02:56 PM
|
#9
|
|
New Member
Join Date: Jul 2020
Location: Sun Prairie
Posts: 3
M.O.C. #26791
|
AZ Traveler
I have not, don't have any idea about new hardware for the pivot door.
What is the improvement ? Have a link to a kit ?
Much Thx in advance
Scott
|
|
|
|
|
12-06-2023, 03:06 PM
|
#10
|
|
Site Team
Join Date: Sep 2017
Location: Oro Valley
Posts: 3,933
M.O.C. #20477
|
Scott,
My post was for Jeff but here is some info. Newer units have the updated hardware.
The door is made by Morryde.
They have and "improved" replacement part.
SP205-517 (roller space plate)
UO136-2074 (sliding door roller)
try:Jennifer.Gregory@morryde.com
__________________
Zack and Donna plus Millie and Ranger
2018 3160RL
"Life is too short to stay indoors, enjoy the ride!"
|
|
|
|
|
12-06-2023, 03:33 PM
|
#11
|
|
Seasoned Camper
Join Date: Dec 2018
Location: El Cajon
Posts: 87
M.O.C. #23160
|
See photo. Used bolt and locking nut.
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Linear Mode
