Inverted Outlets

[Chalkie]

Originally Posted by C&P RV

It inspired me to trace all the circuits in my 2022 3791RD.

So to be clear, is the diagram you show something you created or is it something actually from Keystone? We have the 2021 the plugs do not seem to be the same which is entirely possible as they are different years.

[Foldbak]

Originally Posted by Chalkie

So to be clear, is the diagram you show something you created or is it something actually from Keystone? We have the 2021 the plugs do not seem to be the same which is entirely possible as they are different years.

If you look at the bottom right you'll see this is a Keystone engineered drawing. Most likely with the assistance of Victron and Magnum.

[Chalkie]

Originally Posted by Foldbak

If you look at the bottom right you'll see this is a Keystone engineered drawing. Most likely with the assistance of Victron and Magnum.

Yes, I did see that on your attachment, but I was asking about the one C&P posted.

[C&P RV]

Originally Posted by Chalkie

Yes, I did see that on your attachment, but I was asking about the one C&P posted.

Yes, I created this diagram based on the wiring in my 2022 3791RD. It's accurate for my camper, but may not be accurate for anyone else's camper. It only captures the AC electrical outlet circuits and not how the wiring actually runs to each outlet. But, by knowing which circuit each plug is on, if one or more plugs stop working, I can pull the cover off of other working plugs on that circuit to isolate the problem.

[LeftOverParts]

Depending on what inverter you have and if it’s in the basement, it may allow you to add a sub-panel and extra outlets. Doing this to add the basement and bedroom outlet should be straightforward in the sense that the areas are accessible.

Our 2021 3231 has a Magnum 2000 watt inverter in the basement. The inverted circuits are plugged into the GFCI outlet on the inverter. The manual shows where a sub panel could go. (I’m a DIYer so don’t want to advise on breakers and wiring details). An electrician will be able to do this.

In case you have a Magnum, here’s a snip of the front panel (see note 10) and a link to the 2000 watt manual. (The snip is hard to read unless you click on it).

https://www.magnum-dimensions.com/si...W2012-X%29.pdf

Good luck and let us know how it turns out.

[Jamric]

so a 12/2 wire can be added to the inverter and ran to bedroom , does it need a gfi receptical ?

[Shaw918]

No it does t. Just the television