|
06-12-2022, 10:23 PM
|
#1
|
Established Member
Join Date: Nov 2017
Location: Lethbridge
Posts: 11
M.O.C. #20870
|
Hydraulic cylinders
On our living room slide out, the hydraulic cylinder has a small oil leak at the end seal. Everything I read as well as discussing this with Lippert says I need to replace the cylinder with a new one. On looking closer at the seal end, there is a spring clip which indicates to me that the seal should be able to be replaced. Has anyone had the seal replaced instead of purchasing a new cylinder. Our unit is a 2014 3402RL.
|
|
|
06-13-2022, 03:53 AM
|
#2
|
Montana Master
Join Date: Oct 2019
Location: Jacksonville
Posts: 2,150
M.O.C. #25165
|
I've read of others that had the cylinders rebuilt at a hydraulic shop if they can find the seals, so it is possible. I had ours replaced as it was still under warranty.
__________________
Robert & Diana McNeal
2019 Montana Legacy 3791RD 20th Anniversary Edition
2014 F350 4x4 6.7L SRW
|
|
|
06-13-2022, 06:14 AM
|
#3
|
Montana Master
Join Date: Dec 2017
Location: Mountain Home
Posts: 845
M.O.C. #20949
|
Quote:
Originally Posted by brisam
On our living room slide out, the hydraulic cylinder has a small oil leak at the end seal. Everything I read as well as discussing this with Lippert says I need to replace the cylinder with a new one. On looking closer at the seal end, there is a spring clip which indicates to me that the seal should be able to be replaced. Has anyone had the seal replaced instead of purchasing a new cylinder. Our unit is a 2014 3402RL.
|
The end seal you see IS NOT where the leak is coming from.. All that does is function as a wiper seal for dirt and dust.. nothing more.. The actual seals are inside and YES.. the end of the cylinder screws off and if you have a decent hydraulic shop they can rebuild it or you can DIY if you have the time to hunt down the seals
|
|
|
06-13-2022, 06:57 AM
|
#4
|
Montana Master
Join Date: May 2019
Location: Alton
Posts: 2,716
M.O.C. #24086
|
Hyd jack repair with pictures on Facebook
Keystone Montana RV Owners Group
Search for
Lippert Level up leak repair
By Ken Anderson August 26 2019
https://www.facebook.com/groups/2740...2921538431587/
Hydraulic Plug and cap Size for the JIC37 fittings to cap them off
3404C-04 Cap
2408-04 Plug
Size is 1/4 Inch for cap and plug
__________________
Daryl and Marianne,
2019 3130re 20th Anniversary Edition
2016 F350 Lariat
|
|
|
06-13-2022, 09:02 AM
|
#5
|
Montana Master
Join Date: Jun 2018
Location: Folsom, California
Posts: 553
M.O.C. #21903
|
I've had 2 of my cylinders rebuilt. Both work perfectly, no more. "Slide creep"
__________________
'05 F250 6.0 Bullet Proofed - Sold
'17 F350 6.7 Lariet
'02 Montana 3280RL Upgraded a bunch.
|
|
|
06-13-2022, 12:40 PM
|
#6
|
Montana Master
Join Date: Feb 2005
Location: Haysville
Posts: 4,261
M.O.C. #3085
|
I really don't want to join a private group to watch a video even if it has part numbers listed ... over the years a limited few have posted that they have had their cylinders rebuilt yet no one has ever posted the part numbers for the seals for a given cylinder number. Is this "secret squirrel" stuff or was the information simply not given when you had the cylinder work done? Did anyone save the old seals for part numbers to be cross referenced? I've been a wrench spinner for decades and oddly have had no luck in sourcing seals for these cylinders. In fact, some cylinders in the 2015 timeframe had the cylinder end caps welded on making them non-serviceable.
|
|
|
06-13-2022, 12:58 PM
|
#7
|
Montana Master
Join Date: Jun 2018
Location: Folsom, California
Posts: 553
M.O.C. #21903
|
Quote:
Originally Posted by dieselguy
I really don't want to join a private group to watch a video even if it has part numbers listed ... over the years a limited few have posted that they have had their cylinders rebuilt yet no one has ever posted the part numbers for the seals for a given cylinder number. Is this "secret squirrel" stuff or was the information simply not given when you had the cylinder work done? Did anyone save the old seals for part numbers to be cross referenced? I've been a wrench spinner for decades and oddly have had no luck in sourcing seals for these cylinders. In fact, some cylinders in the 2015 timeframe had the cylinder end caps welded on making them non-serviceable.
|
Didn't have part number for the seals. Hydraulic repair shop said the seals were "standard size" that they had in stock. Welding the end caps provides guaranteed income for the cylinder mfg.
__________________
'05 F250 6.0 Bullet Proofed - Sold
'17 F350 6.7 Lariet
'02 Montana 3280RL Upgraded a bunch.
|
|
|
06-13-2022, 02:20 PM
|
#8
|
Montana Fan
Join Date: Feb 2003
Location: Houston
Posts: 104
M.O.C. #180
|
I tried to get someone to rebuild mine. They said they didn't have the seals in stock, to go to a seal company, take my seals and have them matched. I did, they charged $15 extra for matching the seals. I rebuilt my own.
|
|
|
06-13-2022, 10:25 PM
|
#9
|
Site Team
Join Date: Oct 2005
Location: Carmichael - CA
Posts: 7,400
M.O.C. #4831
|
Quote:
Originally Posted by Daryles
Hyd jack repair with pictures on Facebook
Keystone Montana RV Owners Group
Search for
Lippert Level up leak repair
By Ken Anderson August 26 2019
https://www.facebook.com/groups/2740...2921538431587/
Hydraulic Plug and cap Size for the JIC37 fittings to cap them off
3404C-04 Cap
2408-04 Plug
Size is 1/4 Inch for cap and plug
|
The link provided gets me to:
This content isn't available right now
When this happens, it's usually because the owner only shared it with a small group of people, changed who can see it or it's been deleted.
I assume this is a link to a Montana group (there are a bunch of them) that I am not a member of. I have no idea what "Montana" group it might be but I am pretty sure "Keystone Montana RV Owners Group" isn't it since a Search for that group on FB fails. There is a " Keystone RV Montana Owners" group with 398 members. I tried to join that one last year and was rejected without explanation. I am not a fan of FB to start (I really only have it to see what my kids and grand kids are doing). The proliferation of Montana related groups on FB results in valuable information being unavailable to those who might need it.
Quote:
Originally Posted by dieselguy
I really don't want to join a private group to watch a video even if it has part numbers listed ... over the years a limited few have posted that they have had their cylinders rebuilt yet no one has ever posted the part numbers for the seals for a given cylinder number. Is this "secret squirrel" stuff or was the information simply not given when you had the cylinder work done? Did anyone save the old seals for part numbers to be cross referenced? I've been a wrench spinner for decades and oddly have had no luck in sourcing seals for these cylinders. In fact, some cylinders in the 2015 timeframe had the cylinder end caps welded on making them non-serviceable.
|
Hear, Hear! What are the seal numbers for those who may need them?
__________________
Carl (n Susan)
There is more to life than fuel mileage.
2012 Montana 3700RL Big Sky Package towed by a 2015 Ford F350 6.7L PSD 4WD CC LWB
|
|
|
06-14-2022, 06:20 AM
|
#10
|
Montana Master
Join Date: Dec 2017
Location: Mountain Home
Posts: 845
M.O.C. #20949
|
I am a member of that FB group and while the OP has nice pics there are no part numbers listed.... never have been
If and when I have a slide out cylinder fail ( and I am not wishing for one to fail ) I will take the end cap off "If I can" and get the part numbers for the cylinder and post here....
They should be the same because the only difference in slide cylinders is the length of travel
I have also looked many times for someone to list the part numbers for the front LG or mid/rear levelers and havent seen those either.... Those can be rebuilt provided the thing isnt scored to death on the inside
|
|
|
06-19-2022, 01:54 PM
|
#11
|
Montana Fan
Join Date: Sep 2018
Location: Terry
Posts: 154
M.O.C. #22698
|
I recently pulled a cylinder and took to a local hydraulics shop and they did a total seal replacement and pressure test for $150. and it works great. Beats $650 all day long.
|
|
|
06-19-2022, 02:48 PM
|
#12
|
Montana Master
Join Date: Feb 2005
Location: Haysville
Posts: 4,261
M.O.C. #3085
|
Thanks ChuckS ... if and when the time comes, please post what I and several others have asked for on more than one occasion. It's just odd to me that maybe a dozen or so have responded on more than one thread about slide cylinder repairs on the MOC. They all say they have had them repaired at a local shop, but not once did any of those replies contain any part numbers even after I directly asked for them. Maybe the repair shops don't want to give away info to risk loosing future business. You and I both know replacing probably 2 cup seals on the piston, a rod seal and a wiper is all there is to it ... barring any cylinder scoring like you mentioned. The piston seals might be an O-ring or two with backup rings instead of cup seals, but someday we'll honestly know. I'm not going to take one of mine apart just for seal numbers to cross reference ... Ha!
|
|
|
06-19-2022, 03:01 PM
|
#13
|
Montana Fan
Join Date: Jan 2019
Location: Sun City
Posts: 408
M.O.C. #23256
|
I live near Phoenix and after checking around it was cheaper to buy a new cylinder for about 350 than to get it rebuilt around here
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|