|
|
04-23-2015, 02:07 PM
|
#1
|
Montana Master
Join Date: Mar 2005
Location: Port Orchard
Posts: 1,153
M.O.C. #3403
|
POWER CONTROL HUM
Anyone else have a loud Power Control Center? Our Progressive Dynamics PD4500 series power control center hums like an old transformer. It is in a 2014 BS382RL that we just purchased a month ago new off the lot.
|
|
|
04-23-2015, 02:27 PM
|
#2
|
Montana Master
Join Date: Oct 2012
Location: Box Elder
Posts: 4,712
M.O.C. #12947
|
We get a little noise from the fans running if we are using a lot of 12 volt power, but it's not too load. Maybe you have a bad fan motor or there is something contacting one of the fans.
__________________
Bob & Becky
2012 3402RL
2012 Chevy 2500HD D/A CC 4WD
|
|
|
04-23-2015, 02:32 PM
|
#3
|
Montana Master
Join Date: May 2011
Location: Hixson
Posts: 3,436
M.O.C. #11397
|
Ours is not noisy.
__________________
2018.5 Montana 3791RD
Full Timers 9/1/2010 through 1/16/2020.
|
|
|
04-23-2015, 03:07 PM
|
#4
|
Montana Master
Join Date: Mar 2015
Location: West Richland
Posts: 1,253
M.O.C. #17164
|
Mine is loud enough that you can easily hear it unless the TV is on.
Tom Marty
3160RL
__________________
|
|
|
04-23-2015, 04:33 PM
|
#5
|
Montana Master
Join Date: Aug 2010
Location: Washington Coast
Posts: 2,688
M.O.C. #10696
|
Nope never have even heard mine,quiet as a mouse,so was my 2012
__________________
[
|
|
|
04-23-2015, 05:09 PM
|
#6
|
Montana Master
Join Date: Feb 2012
Location: Lake Gaston
Posts: 8,773
M.O.C. #12156
|
Super quiet here
__________________
Mike and Lorraine
2002 3655 FL, 2005 3650RK
2010 3665RE, 2015 3910FB
F350 crew cab dually 6.7
|
|
|
04-23-2015, 06:06 PM
|
#7
|
Montana Master
Join Date: Mar 2005
Location: Port Orchard
Posts: 1,153
M.O.C. #3403
|
Fan is not on and not using any lights. Plugged in to 15A 120v at home to keep batteries charged. If TV was on I probably couldn't hear it, but our 2007 3400RL never was this loud.
|
|
|
04-24-2015, 12:07 AM
|
#8
|
Montana Fan
Join Date: Aug 2013
Location: Hudson
Posts: 168
M.O.C. #13711
|
Quote:
quote:Originally posted by Fire5er
Fan is not on and not using any lights. Plugged in to 15A 120v at home to keep batteries charged. If TV was on I probably couldn't hear it, but our 2007 3400RL never was this loud.
|
Do you have a transfer switch in your unit. I had one that had AC coils and had a hum that drove me nuts. Replaced it with one with dc coils. It is silent. My EMS internal was also noisy with a hum that I didn't like but my wife never noticed. I removed and bought a portable EMS and once again camper was silent.
I thought I would mention this as I thought my converter was humming until I followed the noise to both of the components I installed.
__________________
2014 Montana 3725 RL
2012 Silverado 3500 Ext. Cab, Long box, Duramax SRW
Trailersaver BD3 hitch
|
|
|
04-24-2015, 04:11 AM
|
#9
|
Montana Master
Join Date: Mar 2005
Location: Port Orchard
Posts: 1,153
M.O.C. #3403
|
My rig is in storage at my house plugged in to an extension cord to keep the batteries charged everything else is off.
|
|
|
04-24-2015, 08:55 AM
|
#10
|
Montana Master
Join Date: Mar 2005
Location: Port Orchard
Posts: 1,153
M.O.C. #3403
|
I kept digging into the humming noise under the stairs and found it coming from the generator automatic transfer switch. So it's not the power control panel and converter. I don't even have a generator, the rig is just set-up for one. Any idea what to do to make the humming stop?
|
|
|
04-25-2015, 03:41 AM
|
#11
|
Montana Fan
Join Date: Aug 2013
Location: Hudson
Posts: 168
M.O.C. #13711
|
Quote:
quote:Originally posted by Fire5er
I kept digging into the humming noise under the stairs and found it coming from the generator automatic transfer switch. So it's not the power control panel and converter. I don't even have a generator, the rig is just set-up for one. Any idea what to do to make the humming stop?
|
Yes, but you most likely will not like the answer. Your transfer switch when you plug into power benergizes a AC coil that is that moves contacts that allow power into the camper. When you run a generator, another relay (electic magnetic switch ) will energize and allow power from the generator into the camper. Keystone uses a transfer switch which uses AC to energize the magnetic coils. I bought one like Keystone uses to install in my camper to allow my generators to plug into a another power inlet I installed in the front of my camper. Didn't do my research first and made assumption that Keystone knew what they were doing. The unit they use is a cheaper unit and works well but is noisy. You will not noticed it with the generators but when plugged in at the campsite different story.
The first transfer switch which worked well cost me around $100 dollars. Gave it away to a friend that now uses it in his RV and does not mind the noise. Bought my second transfer switch for $239.40 from RV power parts plus. It is a 50 amp transfer switch made by Intellitec which uses DC coils to do the switching and has it configured that the power from the line runs through contacts that are normally closed thereby passing the current directly through to the camper. When you start the generators the DC relays activate and switch to generator power after a brief delay allowing the generators to stabilize. Even with the generators this switch is silent.
The problem with the switch that Keystone uses, is it requires one AC relay to be energized to allow power into the camper. This AC relay in a no power situation in normally open. It needs power to allow power into the camper. That is why you will here a click when you plug in if you are standing close to the switch you have now.
In my opinion, your options, one live with it ( I sure couldn't ) or replace it with one that uses different technology. My learning experience was a little costly.
Hope I was not to long winded with my response.
Jay
__________________
2014 Montana 3725 RL
2012 Silverado 3500 Ext. Cab, Long box, Duramax SRW
Trailersaver BD3 hitch
|
|
|
04-26-2015, 04:00 PM
|
#12
|
Montana Fan
Join Date: Apr 2008
Location: Dubuque
Posts: 190
M.O.C. #8421
|
If you don't ever use a gen why not just bypass it.
|
|
|
04-26-2015, 05:11 PM
|
#13
|
Montana Master
Join Date: Mar 2015
Location: West Richland
Posts: 1,253
M.O.C. #17164
|
Thanks for the great information Jay. I will now have to check in more detail exactly which component is making the obnoxious humming noise. It is defiantly near my stairs. I will have to take the cover off in the storage area to confirm the culprit.
Tom Marty
__________________
|
|
|
04-26-2015, 05:59 PM
|
#14
|
Site Team
Join Date: Aug 2007
Location: Omaha
Posts: 6,754
M.O.C. #7560
|
Karl-- Since your unit is a 2014, it should be under warranty yet and I'd take it back to the dealer and have them take care of the problem whether it needs to be replaced or whatever needs to be done to silence it.
|
|
|
04-27-2015, 05:49 AM
|
#15
|
Montana Master
Join Date: Mar 2005
Location: Port Orchard
Posts: 1,153
M.O.C. #3403
|
Thanks for the info guys. I was sick yesterday so was not able to get on here are see the info you all shared. I plan on taking it back to the dealer and letting them take care of it. But if it is "Normal" then I plan to just by-pass the transfer switch because I do not plan on using the on board generator wiring. Jay I do hear the click when plugging the rig into a power source and assumed it to be the transfer switch. Thanks again for all the great feedback.
|
|
|
05-15-2015, 08:52 AM
|
#16
|
Seasoned Camper
Join Date: Jan 2015
Location: San Dimas
Posts: 50
M.O.C. #16017
|
Hi:
We have a 2015 379RL which makes the same hum. It is the Transfer switch behind the wall in your pass through storage. It is normal but obnoxious. You can buy a better switch or bypass it if you are not using a generator. I plan to bypass mine when I have time.
Regards,
Steve
Quote:
quote:Originally posted by Fire5er
Thanks for the info guys. I was sick yesterday so was not able to get on here are see the info you all shared. I plan on taking it back to the dealer and letting them take care of it. But if it is "Normal" then I plan to just by-pass the transfer switch because I do not plan on using the on board generator wiring. Jay I do hear the click when plugging the rig into a power source and assumed it to be the transfer switch. Thanks again for all the great feedback.
|
|
|
|
05-24-2015, 04:58 PM
|
#17
|
Montana Master
Join Date: Mar 2015
Location: West Richland
Posts: 1,253
M.O.C. #17164
|
While I was camping this weekend (boon-docking) every time I turned the generator on the transfer switch took 5-15 seconds to engage and then it does so with a loud bang. At least it did not buzz loudly as we were not hooked up to any AC besides the generator. It is on the list for the dealer to check out for both the loud humming/buzzing noise and for the banging when switching for current from the generator. It was not under any more load than normal. In other words I did have the HW heater switch off so it should have been mainly DC current being used from the converter.
Tom Marty
__________________
|
|
|
08-20-2020, 07:07 PM
|
#18
|
Seasoned Camper
Join Date: Sep 2018
Location: Bloomington
Posts: 57
M.O.C. #22743
|
Saw these comments on another site.
Person A
“The only problem with this is, say your batteries are low, and you need 120 volts from either a pedestal or a generator to get your charger/converter to charge the batteries, how do you get enough DC voltage to close the contactor in the transfer switch?“
Person B
“Person A has a point about it being preferable to use 120 VAC line power to control the coil. There are a few other options if you want to use AC line power but use DC coils for better contact life and reduced humming. One option is to install a full wave bridge rectifier on the AC power going to the coil, then use a 125 VDC coil. Another option, if you want to scrounge parts from medium voltage motor controllers, is to use a contactor economizing module. The CEM takes in 120 VAC power going to control the coil. Initially when it receives power it passes rectified 120 VAC to the coil, then after a few seconds it drops the voltage down to maybe 20-30 VDC, I don't recall exactly. This prolongs the coil life and eliminates the humming.“
I’m in over my head, but would like to do further research. Can any of you speak to this from your own experience as to whether Person A’s issue is significant? And/or can any of you translate Person B’s response into plainer English?
Thanks!
|
|
|
08-20-2020, 10:08 PM
|
#19
|
Montana Master
Join Date: Mar 2015
Location: West Richland
Posts: 1,253
M.O.C. #17164
|
This topic was from a few years back. RookieDCB I have just lived with the obnoxious hum from my transfer switch. My guess is that so long as I have the obnoxious humming than my batteries will be totally charged up so if I had the DC style transfer switch the batteries would still be charged. Last but not least is if I am boon-docking and start my generator it still takes somewhere around five to ten seconds for the transfer switch to work so my guess is if your batteries will start your generator than they will have enough juice to operate your DC transfer switch.
Tom Marty
__________________
|
|
|
09-17-2020, 05:24 PM
|
#20
|
Established Member
Join Date: Jul 2018
Location: Aurora
Posts: 45
M.O.C. #22108
|
Transfer switch
I might be a little late but I kind of just had the humming issue.
I reset the breaker at the pole for 20 seconds and the humming went silent.
This humming started after turning off the breaker at the post, firing up the generator to exercise it under load for 20 minutes, shutting down the gen then turning back on the power at the pole. I am assuming since I have not exercised my transfer switch that it “might” of got hung up even though I had full power. Maybe maybe not but it worked.
Hope this helps.
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|