|
Refrigerator leaning outward
While getting the rig ready to head to Phoenix, I noticed the refer leaning outward. The top mounting screws backed out and the clips look like they are bent after securing the screws, and still the refer leaned away from opening.
For now, I drilled two holes in the top trim and 2 holes on the left side trim by freezer opening. Then I ran a screw in each hole fastening into the backing boards of frame opening.
Later I will run a piece of wood or metal trim across the top securing it to the wood framing behind.
Hope this works and someone can use the same solution.
|
Threaded Mode
