![Reply](/forums/images/mo/buttons/reply.gif) |
|
02-13-2024, 04:46 PM
|
#1
|
New Member
Join Date: Jan 2024
Location: Janesville
Posts: 8
M.O.C. #33792
|
First 5er pull - Gotchas?
Looks like I found our first Montana 5er (373RD)! Going 4 hours from home on Saturday to pick it up and pull it home. The seller is including a Pullrite 2900 autoslider that I'm told came from a 2020+ GMC 2500 with puck. I think it was made for an older GMC but now has the adapter rack that fits the newer puck system. We have a 2024 3500HD with puck system.
I've pulled many trailers over the years and grew up on a farm driving tractors and pulling balers and wagons. But I've never pulled a 5th wheel trailer. I don't feel like a towing newbie, but I know enough to consider things I may not think of!
Private seller, but we are exchanging at an RV dealer shop so I'm hopeful they will help me get set up safely.
Any first timer tips, tricks that you'd offer to avoid a gotcha that I might not think about? Hooking up? Braking? turning? making a tight turn into my driveway at home? Any tools, etc that I might not think to take with? etc
TIA!
|
|
|
02-13-2024, 04:59 PM
|
#2
|
Montana Master
Join Date: Dec 2009
Location: Sebring
Posts: 3,659
M.O.C. #9969
|
Becareful, I thing GM changed the Puck spacing on the '23s & 24s from the previous years. Good friend just sold his hitch from his '22 truck because it won't fit his '23.
__________________
Michelle & Ann
2018 Chevy 3500HD High Country DRW 4X4 Crew Cab w/Duramax/Allison, Formally 2010 Montana 2955RL, Now Loaded 2016 SOB, Mor/ryde IS, Disc Brakes & Pin Box, Comfort Ride Hitch, Sailun 17.5 Tires.
|
|
|
02-13-2024, 06:03 PM
|
#3
|
Seasoned Camper
Join Date: Dec 2022
Location: Manahawkin
Posts: 69
M.O.C. #32095
|
Look at some You Tube videos, there is info on hitching etc
Best of luck with your purchase. Let us know how it goes!
Best
__________________
2023 Keystone Montana High Country 295RL
2022 GMC Sierra Duramax 2500 Denali
S&B 62 gallon diesel fuel tank
Slide toppers
|
|
|
02-13-2024, 06:20 PM
|
#4
|
Site Team
Join Date: Sep 2017
Location: Oro Valley
Posts: 3,933
M.O.C. #20477
|
Darin,
Don't know how many of the trailers you have pulled are over 13 ft tall. If you haven't pulled many tall rigs, remember to look up.
Otherwise the 5th wheel is easier than a bumper pull.
__________________
Zack and Donna plus Millie and Ranger
2018 3160RL
"Life is too short to stay indoors, enjoy the ride!"
|
|
|
02-13-2024, 06:24 PM
|
#5
|
Montana Master
Join Date: Jan 2022
Location: Shingle Springs
Posts: 2,236
M.O.C. #30417
|
I assume it comes with a capture plate? I have an Demco auto and love it, but I have to be dead on straight when connecting. The Pullrite is a bit more forgiving. My buddy has one and loves it. As far as towing or backing, you'll be shocked at how easy it is especially with an auto slide. Much easier then a tow behind.
__________________
Tony & Donna
2022 Montana HC, 295RL, Solar Flex 400, Onan 3600 LPG, 2K inverter, 200AH Lithium. 2020 GMC Denali 2500 6.6 Duramax, Demco 21K Auto Slide
|
|
|
02-13-2024, 06:47 PM
|
#6
|
Montana Fan
Join Date: Jun 2019
Location: new river
Posts: 414
M.O.C. #24181
|
i also have a pulrite slider. make sure that capture plate is secure, the one "bolt" that holds it on came loose on mine and fell offf, it would sure put a hurt on your foot if it hit it. i also find you need to be pretty straight on when hooking up
__________________
al meyer
3931fb
az
|
|
|
02-13-2024, 08:26 PM
|
#7
|
Montana Master
Join Date: Apr 2006
Location: Mesa az
Posts: 2,953
M.O.C. #5651
|
As for tight turns, my suggestion is to always pull pretty much straight as far as you can and then turn almost as tight as you can. The rigs are WAY behind you and the wheels cut the corner, so tight turns get you thru the intersection and around the corner.
I also have a Superglide Pullrite, but not the new puck system. Supposedly you can hitch up to 15 degrees off center. Also, on my style, you kind of have to block the wheels and often back up an inch or two to relieve the pressure on the latch before disconnecting.
These sliders are great. I got in to a state campground to check it out and it turned out to be a dead end with about a 40 foot circle at the end. I turned to an almost 90 degree corner and was able to just drive out.
__________________
![](image.php?s=e356ff87e302e05010dfd329c871ca79&u=5651&type=sigpic&dateline=1508620065)
Tom and Gail
2013 Mountaineer 362
2012 Silverado 2500
|
|
|
02-14-2024, 06:14 AM
|
#8
|
New Member
Join Date: Jan 2024
Location: Janesville
Posts: 8
M.O.C. #33792
|
Quote:
Originally Posted by AZ Traveler
Darin,
Don't know how many of the trailers you have pulled are over 13 ft tall. If you haven't pulled many tall rigs, remember to look up.
Otherwise the 5th wheel is easier than a bumper pull.
|
Except for a wagon full of hay, none! ;-) I had not thought about remembering the height. Thanks!!
|
|
|
02-14-2024, 06:25 AM
|
#9
|
Montana Master
Join Date: Dec 2007
Location: Kansas City, Missouri
Posts: 2,707
M.O.C. #7992
|
Once you are hooked up, before retracting the landing legs, do a tug test to insure the 5'er is truly latched to the hitch. Beware of the tail swing on these things. There is a whole lot of trailer behind the wheels on these 5'ers. And I'll reemphasize what Zach said, "Look up". These things are tall.
Enjoy!
__________________
2006 3000RK
2009 Ram 2500
|
|
|
02-14-2024, 06:36 AM
|
#10
|
Montana Fan
Join Date: Dec 2017
Location: Sharpsburg
Posts: 202
M.O.C. #20974
|
the 23 and 24 gm puck is different then older years
__________________
![](image.php?s=e356ff87e302e05010dfd329c871ca79&u=20974&type=sigpic&dateline=1513986662)
2023 GMC 2500 HD AT4
2018 High Country 340BH
|
|
|
02-14-2024, 08:31 AM
|
#11
|
Montana Master
Join Date: Oct 2006
Location: McKinney
Posts: 7,169
M.O.C. #6433
|
First time I hooked up and started pulling out of the dealer lot, I looked in my mirrors and thought, my God that thing is big! What have I done! As mentioned above; height, wide turns, and tailswing.
More than once I almost got in trouble by forgetting the height. Once in a state park with narrow lanes and trees close along side. Stopped just in time to prevent hitting the roof on an overhanging limb over the road. Another time I pulled up to the rear of a Sonic drive in to get something to eat and edged up to the rearmost stall stopping just short of the overhead awning. When I got ready to leave I almost started to pull forward. Thankfully it was "almost".
Wide on the turns, especially right turns, to keep from jumping curbs or scraping something along side the road. And pulling in/out of service stations.
And tail swing. After years of pulling mine in and out of a covered storage facility with no problem, one time I got careless. Tail swing caught a steel column and nearly ripped the rear cap off. About $14,000 damage. Thankfully insurance covered all but $500 deductible.
Otherwise, just enjoy you new toy.
__________________
Bill & Patricia
Riley, our Golden
2007 3075RL (recently sold, currently without)
|
|
|
02-14-2024, 08:44 AM
|
#12
|
Seasoned Camper
Join Date: Aug 2022
Location: southern
Posts: 61
M.O.C. #31539
|
Congratulations on the new camper.
Here's my take on what's critical:
1) make sure the pin of the camper is correctly in the hitch jaws, and jaws locked.
2) Safety brake away cord attached.
3) Tires on the truck and camper are properly inflated.
4) brakes on the camper are working
After that as others have said, know what the height is and watch for low limbs. The camper will cut the corners shorter than a bumper pull so swing that turns wide.
__________________
2011 Montana Mountaineer 295RKD
2005 Ram 3500 Dually
|
|
|
02-14-2024, 09:16 AM
|
#13
|
Montana Fan
Join Date: Mar 2021
Location: Western NY
Posts: 491
M.O.C. #28430
|
I’ll add when maneuvering in tight spaces, call your partner on the hands free device in your truck and have them outside watching and communicating. Not only looking for things on the ground to keep you informed of, but looking up for low hanging branches etc. Know simple hand signals helps for those areas we all want to be in that have no cell service.
And remember the “if you can’t see my mirrors, I can’t see you” rule.
Have fun and enjoy that new rig!
__________________
Mark & Karen
2021 3121rl - slide toppers, cottage white, TST 507 TPMS, X-Factors, disc brakes
2021 F-350, 6.7L, SRW CC LB - B&W Companion, Bakflip cover
|
|
|
02-14-2024, 10:05 AM
|
#14
|
Montana Master
Join Date: Jan 2022
Location: Shingle Springs
Posts: 2,236
M.O.C. #30417
|
I'll add one more thing regarding height. Don't rely on what Keystone says. Hook up on flat ground and measure from the ground to the roof. Then measure the front AC height. Add the 2 and there's your actual height. It may be an inch or two higher depending on how your hitch and pin box is installed.
__________________
Tony & Donna
2022 Montana HC, 295RL, Solar Flex 400, Onan 3600 LPG, 2K inverter, 200AH Lithium. 2020 GMC Denali 2500 6.6 Duramax, Demco 21K Auto Slide
|
|
|
02-14-2024, 10:26 AM
|
#15
|
Montana Fan
Join Date: Dec 2016
Location: Parts Unknown
Posts: 129
M.O.C. #19318
|
Quote:
Originally Posted by BB_TX
Wide on the turns, especially right turns, to keep from jumping curbs or scraping something along side the road. And pulling in/out of service stations.:
|
When I was in truck-driving school getting a Class A CDL oh so many years ago, we were taught to do just this--take it wide on the turns! Just think to yourself, "As a matter of fact, I *do* own the road." I still give the same consideration to truckers and RV'ers today--for that turn, they do own the road.
|
|
|
02-14-2024, 05:19 PM
|
#16
|
Montana Master
Join Date: May 2019
Location: Alton
Posts: 2,701
M.O.C. #24086
|
Watch your height!!!
The brochure says you are supposed to be 13'6".
Measure it yourself, hitched, from the ground to the top of the front AC unit so you KNOW what you actually are.
We were going up US-1 on the way to Fort Belvoir Va.
At Colchester Va we saw this.
I knew we were exactly 13'4" so we proceeded down the middle of the road at walking speed.
We made it.
|
|
|
02-18-2024, 07:11 AM
|
#17
|
New Member
Join Date: Jan 2024
Location: Janesville
Posts: 8
M.O.C. #33792
|
It's Official!
Margie is home! 2020 Montana HC 373RD with Pullrite 2900 autoslider hitch.
Thanks Jeff (seller)! Super nice man who took exceptional care of her! She looks absolutely brand new inside and out!
Hook up was a snap and super easy pulling her down the road. I backed her into the driveway on the 2nd try. Keeping her straight back was easy, but with my bumper pull backing experience, I think I was over correcting trying to turn and re-straighten when backing.
Disconnect was simple. Only issue was a failed auto level. My front jacks are downhill and I think they hit the limit before getting level. I'll put the truck back under her, lift them, block them, and try again today.
Thanks everyone for the assist! I think I saved a few scratches from low tree limbs on our country roads with the "look up/height awareness" advice!
|
|
|
02-18-2024, 02:04 PM
|
#18
|
New Member
Join Date: Jul 2019
Location: SHAVERTOWN
Posts: 7
M.O.C. #24513
|
Just make sure you have A/C clearance when encountering overpasses. I drove to Lakeshore RV near Muskegon, Michigan. On my way there, my wife made notes on the clearances of every overpass. Probably unnecessary on the interstate highways, but I was being over cautious. Better safe than sorry.
__________________
Mike & Teresa
1984 Prowler 27X
2019 Montana 3791RD
2003 Dodge 3500 Dually Diesel
|
|
|
02-18-2024, 04:13 PM
|
#19
|
Montana Fan
Join Date: Mar 2020
Location: Frostbite Falls
Posts: 434
M.O.C. #26015
|
I put 13'6" in the Garmin & hope she doesn't screw me over.
|
|
|
02-18-2024, 04:15 PM
|
#20
|
Montana Master
Join Date: Apr 2017
Location: 1000 oaks
Posts: 954
M.O.C. #19630
|
Quote:
Originally Posted by Skw774
the 23 and 24 gm puck is different then older years
|
The B&W Companion hitch for GM OEM puck system is the same part number for 2020-2024 GM trucks. No difference.
__________________
2011 2955RL Gen-Y Executive Kingpin
2022 GMC 2500HD Duramax/Alison
4X4 Crew Cab/Standard bed.
|
|
|
![Reply](/forums/images/mo/buttons/reply.gif) |
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|