It’s long but here’s a post that might be helpful.
Your’s might be a different problem but I found that many of our hinge screws were stripped and the door was leaning towards the latch side doing what you described. I added larger diameter screws (#10) to pull the hinges in tight. Note that same size but longer screws will not help. Then added Irollmans all-thread fix to help it be permanent. Once fixed, we keep the hinges and door latch/lock lubed with graphite lock lube. No problems since the fix and still working well.
https://www.montanaowners.com/forums...ain+entry+door
__________________
2021 3231CK, Legacy - dual panes, Kodiak 250 discs, slide awnings, iN-Command, TST-507, 206 Ah SOK LiPo, Starlink RV
2021 F350 SRW CC, 6.7, LB, 4360 pyld, 2800 lb rear SumoSprings, spray on bedliner, 19K Demco Recon on factory pucks
|