Melted Dining Table

[cwatro1]

We had the same thing happen to us. I ended up having to take the table apart and sand and refinish the whole top. I then put on 4 coats of polyurethane on before reinstalling the table. Good luck.

[BobStack]

Use Mayonnaise, it will take it right off

[Frank64]

We have the same type of table. We have to use place mats. Our plates will discolor the table and I have to buff it out with dawn detergent then polish to remove these type of markingsSince we use place mats no issues

[Mikendebbie]

DW knew about the mayonnaise fix and she says it works!

[Frank64]

Will try this��*��

[Trudy]

We also have a 2021 3131 RL and would like to take our table out and replace with a desk. Would you mind sharing more details about your project?
Height, length, depth. Material used for top and legs. It would be much appreciated. Thank you

[leahbill]

We have always used place mats on the table.

[DebNJim B]

Originally Posted by Trudy

We also have a 2021 3131 RL and would like to take our table out and replace with a desk. Would you mind sharing more details about your project?
Height, length, depth. Material used for top and legs. It would be much appreciated. Thank you

Not sure if you mean my project or Bstarr's, but here's what I did.

Removed the cantilevered table that was not level.
Bought a 60 X 24 table top from Amazon:
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
Support hinges from Amazon:
https://www.amazon.com/gp/product/B0...e?ie=UTF8&th=1

Install was pretty straight forward. I just mounted the supports where the old table was mounted and set the table top on it and fastened it down. I made it so I can put it down when traveling but there is enough room it could be left up.