chart for input on Magnmum display for Lithium batteries
Hi all,
Thanks for your suggestions. My friend found this chart for input settings on the magnum. I changes to the settings in the chart and seemed to work as the batteries charged to 100% and the D/C, A/C , microwave, lights, usb, electric water heater all worked when on shore power for the 2.5 weeks in Red Lodge Montana. Just before we left I unplugged from shore power and my wife wanted to use the microwave so I hit the inverter button on the magnum display and their was a flicker of the lights and the fault light came on :-( turned the generator on and that didn't give power as the inverter fault light was on...we were leaving for home (and our next overnight stop) and figured we'd figure out what was going on when we got to our over night stop...Couldn't so when we got home made an appointment for servicing, winterizing and fixing our electrical issues. I'll post when we get the RV in for the servicing (October 29th the RV goes in for the service) I've attached the input sheet and some pics of the magnum monitor messages. John
|